04
Mar
ANTI-GRAFF R EKO’R
ANTI-GRAFF R EKO’R isa colourless, re-coatable sacrificial anti-graffiti coating made from bio-based raw materials. This water-based, solvent-free treatment provides a matte finish that preserves the original appearance of surfaces. As a 2-in-1 solution, it offers both graffiti and water protection while remaining microporous. Suitable for both indoor and outdoor applications, it delivers durable UV resistance without yellowing.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Made from bio-based raw materials – environmentally friendly
- Solvent-free and odourless – ideal for sensitive or indoor sites
- Dual protection: anti-graffiti and water-repellent
- Microporous – allows the surface to breathe
- High UV resistance – does not yellow over time
- Quick and easy to apply – roller, brush, or spray
- Water-based – tools clean easily with water
Surface Preparation :
Ensure the surface is clean, dry, and structurally sound. Remove dust, grease, pollution, or loose coatings.
Application :
Use the product ready-to-use (do not dilute). Stir thoroughly before use. Apply two crossed coats (wet-on-tack is recommended if possible), leaving approx. 2 hours between coats depending on temperature. Avoid over-application.
Drying :
The protective coating becomes effective after around 2 hours, depending on weather conditions.
Graffiti Removal :
Remove graffiti using hot water (minimum 90°C) at Max 90 bar pressure. The sacrificial protective layer is removed and must be reapplied.
Tool Cleaning :
Clean tools immediately with hot water.
- Compatible Surfaces: Stone, concrete, wood, hydraulic renders
- Application Temperature: +5°C to +50°C; avoid extremes
- Coverage: 150–200 g/m², depending on substrate porosity
- Storage: Store frost-free, in a dry place, protected from direct sunlight
- Precautions: Avoid contact with unprotected surfaces; do not apply to unprotected metals; wear PPE (gloves, goggles, protective clothing)
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
STONE NET EKO’R
STONE NET EKO’R is a concentrated, eco-friendly cleaner specifically designed for stone façades. It effectively removes atmospheric pollutants such as carbon soiling/black carbon from a wide range of surfaces, including stone, marble, concrete, all types of plaster, and washed gravel. Made from biodegradable raw materials, this façade cleaner is ideal for projects with strict environmental requirements, particularly in urban or high-traffic areas.
Perfect for delicate materials such as limestone, facing stone, sculptures, and other porous or fragile surfaces, STONE NET EKO’R can also be applied using drones, allowing safe and even cleaning of hard-to-reach areas.
BRICK NET EKO’R
BRICK NET EKO’R is a natural, eco-friendly cleaner for brick façades, specifically designed to remove black atmospheric dirt from all mineral and silica-rich surfaces. This water-based façade cleaner is ideal for delicate materials such as brick, concrete, ceramic, sandstone, glass paste, and mignonettes (small ceramic tiles). VOC-free and made from biodegradable raw materials, BRICK NET EKO’R is perfect for projects with strict environmental requirements, especially in high-traffic urban areas. It can also be applied using drones, enabling safe and even cleaning of hard-to-reach areas.
SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel-based façade stripper designed to efficiently remove paints, waterproofing systems, thin RPE coatings and graffiti from a wide range of surfaces (render, concrete, stone, wood, etc.). Thanks to its “flash effect” formula, it works in just 15 to 60 minutes, depending on the coating. Ready to use, it is easy to apply with a brush or airless sprayer. Odourless, safer to use, SCALPEX® SD+ is ideal for rapid, high-performance stripping on vertical surfaces.
SCALPEX® SD NG
SCALPEX® SD NG is an ultra-fast façade stripper designed to remove waterproofing systems, RPE coatings, thin films, adhesives, inks, varnishes and graffiti. Free from methylene chloride, NMP and NEP, it delivers rapid and effective action on a wide variety of substrates, including plaster, concrete, stone, brick, glass mosaic, wood and mineral coatings. Its optimised viscosity ensures excellent adhesion on vertical surfaces, making it ideal for stripping façades and exterior walls.
SCALP DMC 73
SCALP DMC 73 is a professional cleaner specially formulated for calcareous facades (limestone, sandstone) and other mineral surfaces affected by urban pollution. Its powerful action restores the natural brightness of your surfaces while effectively removing atmospheric dirt and stubborn stains. Easy to apply, it delivers flawless results without damaging delicate materials, making it ideal for long-term facade maintenance.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
