Permanent bio-sourced graffiti protection

Bio-Based Sacrificial Anti-Graffiti – ANTI-GRAFF R EKO’R

ANTI-GRAFF R EKO’R isa colourless, re-coatable sacrificial anti-graffiti coating made from bio-based raw materials. This water-based, solvent-free treatment provides a matte finish that preserves the original appearance of surfaces. As a 2-in-1 solution, it offers both graffiti and water protection while remaining microporous. Suitable for both indoor and outdoor applications, it delivers durable UV resistance without yellowing.

CALCULATE YOUR CONSUMPTION

Your surface area is m²

For an area of 0 m², you will need 0.00 L*

Made from bio-based raw materials – environmentally friendly
Solvent-free and odourless – ideal for sensitive or indoor sites
Dual protection: anti-graffiti and water-repellent
Microporous – allows the surface to breathe
High UV resistance – does not yellow over time
Quick and easy to apply – roller, brush, or spray
Water-based – tools clean easily with water

Surface Preparation :
Ensure the surface is clean, dry, and structurally sound. Remove dust, grease, pollution, or loose coatings.

Application :
Use the product ready-to-use (do not dilute). Stir thoroughly before use. Apply two crossed coats (wet-on-tack is recommended if possible), leaving approx. 2 hours between coats depending on temperature. Avoid over-application.

Drying :
The protective coating becomes effective after around 2 hours, depending on weather conditions.

Graffiti Removal :
Remove graffiti using hot water (minimum 90°C) at Max 90 bar pressure. The sacrificial protective layer is removed and must be reapplied.

Tool Cleaning :
Clean tools immediately with hot water.

Compatible Surfaces: Stone, concrete, wood, hydraulic renders
Application Temperature: +5°C to +50°C; avoid extremes
Coverage: 150–200 g/m², depending on substrate porosity
Storage: Store frost-free, in a dry place, protected from direct sunlight
Precautions: Avoid contact with unprotected surfaces; do not apply to unprotected metals; wear PPE (gloves, goggles, protective clothing)

Categories: Anti-Graffiti, Construction, EKO'R range

*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.

Products that may interest you

Enzymatic cleaner for facades – NET ENZYME EKO’R

Construction, Cleaner, EKO'R range

NET ENZYME EKO’R is a professional enzymatic cleaner designed for safe, effective maintenance of facades, roofs, walls, and outdoor flooring. Its innovative bio-based formula uses live bacteria and enzymes to digest organic urban dirt, including moss, algae, leaves, and pollution residues, ensuring long-lasting cleanliness without harsh chemicals. Free from soda, acids, and solvents, NET ENZYME EKO’R is safe for all common building materials, and delivers sustainable results. Its enzymatic action penetrates deep into porous surfaces, breaking down organic deposits and providing lasting surface protection for years.

Quick view

Gentle Stone Cleaner for Facades – SCALP PIERRE AQUA 89

Construction, Cleaner, Drone Products, Cleaning

SCALP PIERRE AQUA 89 is a dedicated stone façade cleaner formulated to remove atmospheric pollution and environmental staining. Its next-generation composition delivers highly effective cleaning while fully respecting fragile substrates. Designed for the gentle maintenance of stone façades, it enables fast, easy and noise-free cleaning—without the need for abrasive or intrusive methods. Suitable for a wide variety of mineral surfaces, SCALP PIERRE AQUA 89 is the ideal solution for maintaining immaculate façades with minimal environmental impact. The product can also be applied by drone, offering a safe, efficient and low-logistics approach for hard-to-reach areas.

Quick view

Professional Limestone & Stone Façade Cleaner – SCALP DMC 73

Construction, Cleaner

SCALP DMC 73 is a professional limestone and stone façade cleaner designed to remove urban pollution, atmospheric deposits, and stubborn dirt from exterior masonry and mineral surfaces. Specially formulated for calcareous stone such as limestone and sandstone, it restores the natural appearance and brightness of building façades without damaging delicate materials. Its ready-to-use formula penetrates deep into the substrate to dissolve encrusted dirt and pollution residues, providing fast and effective façade restoration. Ideal for building maintenance, stone restoration, and heritage cleaning projects, SCALP DMC 73 offers a safe and efficient alternative to abrasive cleaning methods such as sandblasting.

Quick view

Degreaser and rust remover for metal surfaces

Metal surface degreaser & paint adhesion promoter – DEROX 320

Construction, Cleaner

DEROX 320 is a professional metal surface degreaser and paint adhesion promoter designed for preparing metal substrates prior to painting or coating. Specially developed for aluminium, zinc and galvanised steel, this concentrated solution cleans, degreases and activates surfaces to ensure maximum coating performance. Its powerful active formula removes grease, welding residues, light oxides, flux deposits and other contaminants that can compromise adhesion. By creating a perfectly clean and activated substrate, DEROX 320 significantly improves coating durability and prevents common paint defects such as blistering, peeling and flaking.

Quick view

Aluminium & stainless steel cleaner & passivator – SCALPINOX D

Construction, Cleaner, Industry, Passivators

SCALPINOX D is a professional aluminium and stainless steel cleaner designed to restore the original appearance of metal surfaces while preparing them for coating or further treatment. It effectively removes oxidation, tarnish and atmospheric deposits caused by urban pollution, leaving surfaces clean, bright and fully restored. Specially recommended for anodised aluminium window frames and joinery, this solution also provides passivating, rust-removing and phosphating action, creating an optimal bonding base for paint systems and surface treatments. By activating and stabilising metal substrates, SCALPINOX D improves coating adhesion and supports long-lasting renovation, refurbishment and maintenance work across construction and finishing applications.

Quick view