SCALP ANTI-M 3100
SCALP ANTI-M 3100 is a 2-in-1 product
- A biocide and algaecide, it protects surfaces against algae, lichens, and green deposits in no time. It takes effect in two hours and provides long-lasting protection for 2 to 5 years, depending on the climate.
- Water-repellent, SCALP ANTI-M 3100 protects against water infiltration and limits urban grime. It can be used on roofs, facades, walls, and outdoor floors, as a finish on new construction or renovation projects.
It is perfectly suited to surfaces such as tiles, slates, fiber cement, shingles, stone, mineral coatings, bricks, plaster, concrete, roughcast, thick plastic coatings, wood, etc.
Use by drone allows for quick, even, and safe application without direct contact with the surface.
- 2-in-1 product: biocide and water repellent
- Economical and practical product
- Ultra-fast product, flash effect
- Ideal for all surfaces
- Preventive solution
- Very long-lasting, over 2 years (depending on climate)
- VOC-free
- No rinsing required
- Concentrated water-based product
- Sprayable: formula perfectly compatible with drone spraying
- Drone application = Increased safety, time savings, uniform spraying, cost reduction
- Does not damage materials or application equipment
Step 1
Homogenize SCALP ANTI-M 3100.
Step 2
Apply the product until saturated on a dry surface.
Step 3
Leave to act. If there is a thick layer of microorganisms, use a mechanical means to remove them. The treated surface will regain a clean appearance after 2 hours. Never rinse after application.
SCALP ANTI-M 3100 is a professional biocide and water repellent treatment designed to provide long-lasting protection for exterior surfaces against biological attack and water infiltration. Ultra-effective, it protects against algae, lichens, and green deposits in just two hours and acts preventively for up to 5 years, depending on weather conditions.
Versatile, SCALP ANTI-M 3100 can be applied as a finish on new buildings and renovations, on a wide variety of materials: tiles, slates, mineral coatings, stones, bricks, roughcast, concrete, wood, or plastic coatings. It is ideal for treating roofs, facades, walls, and outdoor floors, even those exposed to the elements and urban pollution.
In addition to its preventive action against microorganisms, SCALP ANTI-M 3100 acts as an effective water repellent, creating an invisible barrier against moisture. It thus prevents water infiltration, reduces fouling, and slows down the premature aging of materials.
Formulated in an aqueous phase, this concentrated treatment does not require rinsing. It is simply applied using a sprayer, roller, or brush to a clean, dry surface, impregnating it completely until saturation.
SCALP ANTI-M 3100 is the ideal professional solution for extending the life of materials. Its dual biocide + water-repellent action makes it an essential ally in the long-term protection of buildings.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® SD+
SCALPEX® AL 23
WIPES EXPRESS 90
WIPES EXPRESS 90 EXTREME SOILS is the fast, convenient and ultra-efficient cleaning solution for hands and all smooth surfaces. Thanks to an advanced technology combining non-irritating abrasive wipes and powerful plant-based solvents, these wipes easily remove the most stubborn soiling, without water, rinsing or wiping.
Ideal for all professionals faced with difficult tasks (paints, sludge, oils, greases, tar, bitumen, lubricants, glues, inks, charcoal, waxes, etc.), they offer extreme efficiency even under the most demanding conditions.
Designed for use anywhere, anytime, WIPES EXPRESS 90 wipes are ideal for use in construction, industry, mechanical engineering, painting, marine, landscaping, transport, aeronautics and other sectors. They are also ideal for cleaning tools, car interiors, rims, photocopiers, computers, worktops, machines and whiteboards.
Versatile, they can be used on both hands and non-porous surfaces. The result: fast, residue-free cleaning without damaging the skin or compromising on cleanliness.
SCALPINOX D
SCALPINOX D is a professional cleaner specially formulated to restore the shine of aluminum joinery, especially that exposed to urban pollution. It effectively removes traces of tarnish and atmospheric deposits, restoring surfaces to a clean, shiny appearance.
This product is recommended for in-depth cleaning of anodized aluminum window frames and joinery. SCALPINOX D also acts as a passivating, rust-removing and phosphating agent, preparing aluminum and stainless steel to receive paint or treatment.
By creating an ideal bonding base, SCALPINOX D facilitates renovation, refurbishment and maintenance projects, particularly in the building and finishing trades. It improves paint adhesion.
SCALP ANTI-TACHES EM
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
