04
Mar
New
SCALPFUGE PRO CE
SCALPFUGE PRO CE is a water repellent impregnation agent for the long-lasting protection of new and old concrete facades and walls. Suitable for both indoor and outdoor use, it can be used on all types of concrete (cast-in-place, precast, fiber-reinforced, UHPC, GRC, etc.) and penetrates deeply to form an invisible barrier against water, chlorides, and carbonation. Colorless, non-film-forming, and UV-resistant, it protects without altering the appearance of the substrate.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Water repellent compliant with EN 1504-2
- Water-based, non-film-forming impregnating water repellent
- Ideal for application on all types of porous substrates
- Protects against water, chlorides, carbonation, and corrosion
- Limits damage caused by frost, efflorescence, and microorganisms
- VOC-free
- Microporous
- Does not alter the appearance or porosity of the substrate
- Odorless
- Quick and easy impregnation into the pores of concrete and other materials
- Sprayable
- Indoor and outdoor use
- Protects all types of concrete
- UV resistant: does not yellow
- pH neutral
Step 1:
SCALPFUGE PRO CE is ready to use, never dilute.
Step 2:
- PREPARATION OF THE SURFACE : The surface to be treated must be clean, dust-free, degreased, and dry. On fresh concrete or cement, allow at least 28 days curing time before application.
- APPLICATION : Mix the product thoroughly, then apply to the surface to be treated, working from bottom to top until the surface is saturated. Apply two coats using the “wet on wet” method.
Compatible surfaces: Suitable for all types of concrete, whether new or old: poured concrete, precast concrete, fiber-reinforced concrete, BFUHP, GRC, etc.
Application conditions :
- Temperature: Avoid application in case of rain, high heat, or strong wind.
- On fresh concrete: wait 28 days for curing before application.
- Ensure 24 hours without precipitation after treatment.
Drying time :
- Effective protection after complete drying (approximately 3 days).
- Protect from rain for 24 hours after application.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel-based facade stripper designed to effectively remove paint, waterproofing agents, thin RPE films, and graffiti from various surfaces (plaster, concrete, stone, wood, etc.). Thanks to its “flash effect” formula, it works in 15 to 60 minutes, depending on the coating. Ready to use, it is easy to apply with a brush or airless sprayer. Odorless, non-toxic, and non-harmful, SCALPEX® SD+ is ideal for fast and powerful stripping on vertical surfaces.
SCALPEX® NW NG
SCALPEX® NW NG is an ultra-efficient gel paint stripper designed to thoroughly remove paint, varnish and stain from a wide variety of substrates: wood, woodwork, iron, zinc, concrete, stone and more. Thanks to its gel formula, it adheres perfectly to vertical surfaces without running, making it an essential ally for all interior and exterior renovation work.
This gel stripper is ideal for stripping stairs, window frames, joinery, panels, furniture and other delicate surfaces. Suitable for both renovation and routine stripping jobs.
SCALP RENOV’EXPRESS®
SCALP RENOV'EXPRESS® is an ultra-efficient professional cleaner for cleaning and renovating facades, roofs, floors and walls. It quickly and lastingly removes dirt, atmospheric pollution, encrusted residues and black marks, giving even the dirtiest surfaces a new lease of life.
Versatile, it can be used on a wide variety of materials: stone, brick, concrete, cement, fibrocement, slate, tiles, etc. It is also compatible with many types of coating, whether organic, mineral, lime-based or hydraulic, including thick plastic coatings (RPE) and semi-thick coatings.
DEROX 320
DEROX 320 is a professional degreaser and rust remover specially formulated for the treatment of metal surfaces prior to painting. Ideal for aluminum, zinc and galvanized steel, this highly concentrated product cleans, degreases and prepares substrates in depth, ensuring optimum paint adhesion.
Its active formula effectively eliminates slag, grease, light oxides and other contaminants that can hinder paint adhesion. By creating a perfectly clean bonding base, DEROX 320 avoids the risk of blistering, peeling or flaking paint.
SCALP SOLAR ACTIV
SCALP SOLAR ACTIV' is an innovative, environmentally-friendly stain that revolutionizes the maintenance of mineral surfaces thanks to its photocatalytic technology. Designed to harness the sun's energy, this stain uses UV rays to break down organic and plant-based soiling, keeping surfaces permanently clean.
This self-cleaning action actively combats the development of micro-organisms (algae, lichen...) while preserving the aesthetic appearance of surfaces. SCALP SOLAR ACTIV' forms an invisible protective film that limits soiling and considerably reduces the need for regular cleaning, saving time, effort and resources.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
