04
Mar
SCALP MINÉRALISANT 95
SCALP MINÉRALISANT 95 is a mineralizing agent for stone facades designed to deeply consolidate porous materials such as limestone or siliceous stone, brick, concrete, and mineral coatings. Invisible after application, it provides long-lasting reinforcement without altering the appearance of the substrate. Ideal for restoring old facades, historic monuments, or modern buildings, it provides effective protection against moisture, aging, and external damage.
It can also be applied by drone, an ideal solution for hard-to-reach areas or large surfaces, ensuring fast, even, and safe application.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Long-lasting consolidation of porous materials indoors and outdoors (stone, brick, concrete, mineral plaster)
- Water-based product
- Does not alter the appearance of the surface
- Hardens and solidifies the surface for the long term
- High active ingredient content
- Can be recoated
- Sprayable: formula perfectly compatible with drone spraying
- VOC-free
- Suitable for old facades, historic monuments, and modern buildings
- Drone application = increased safety, time savings, uniform spraying, and cost reduction
Step 1
Thoroughly mix SCALP MINERALISING 95.
Step 2
Apply the product to the clean, dry surface in two coats, 10-15 minutes apart, until saturated.
Step 3
Allow the surface to consolidate for 10 days before applying a water repellent, coating, paint, or decorative finish.
- SCALP MINÉRALISANT 95 should be applied when weather conditions are favorable, i.e., between +5°C and +50°C.
- If the substrate has been rinsed beforehand, wait 10 days before applying the product.
- Allow the substrate to consolidate for about ten days before applying a water repellent.
- Tools should be cleaned with water immediately after use.
- Before application, it is advisable to test the product on a small area to check the compatibility of the substrate.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel-based facade stripper designed to effectively remove paint, waterproofing agents, thin RPE films, and graffiti from various surfaces (plaster, concrete, stone, wood, etc.). Thanks to its “flash effect” formula, it works in 15 to 60 minutes, depending on the coating. Ready to use, it is easy to apply with a brush or airless sprayer. Odorless, non-toxic, and non-harmful, SCALPEX® SD+ is ideal for fast and powerful stripping on vertical surfaces.
WIPES EXPRESS 90
WIPES EXPRESS 90 EXTREME SOILS is the fast, convenient and ultra-efficient cleaning solution for hands and all smooth surfaces. Thanks to an advanced technology combining non-irritating abrasive wipes and powerful plant-based solvents, these wipes easily remove the most stubborn soiling, without water, rinsing or wiping.
Ideal for all professionals faced with difficult tasks (paints, sludge, oils, greases, tar, bitumen, lubricants, glues, inks, charcoal, waxes, etc.), they offer extreme efficiency even under the most demanding conditions.
Designed for use anywhere, anytime, WIPES EXPRESS 90 wipes are ideal for use in construction, industry, mechanical engineering, painting, marine, landscaping, transport, aeronautics and other sectors. They are also ideal for cleaning tools, car interiors, rims, photocopiers, computers, worktops, machines and whiteboards.
Versatile, they can be used on both hands and non-porous surfaces. The result: fast, residue-free cleaning without damaging the skin or compromising on cleanliness.
SCALPNET® AQUA 37
SCALPNET® AQUA 37 is a thixotropic gel cleaner for brick facades. It removes black atmospheric soiling from all mineral or silica-laden surfaces. This facade cleaner is ideal for brick facades. SCALPNET® AQUA 37 is particularly recommended for cleaning fragile materials such as brick, concrete, porcelain, stoneware and glass paste. This brick facade cleaner is ideal for cleaning jobs where environmental constraints are important. SCALPNET® AQUA 37 is perfect for cleaning brick facades in high-traffic areas. It can also be applied by drone, offering a practical and safe solution for hard-to-reach surfaces.
SCALP SENSITIVE SURFACE CLEANER
SCALP SENSITIVE SURFACE CLEANER is the ultimate solution for removing all types of graffiti, whether on surfaces protected with VERNAEAU PU 16 or on delicate surfaces. This special graffiti remover is specially designed for jobs requiring special care. Whether on wood, car bodies, road signs, or other sensitive surfaces, SCALP SENSITIVE SURFACE CLEANER is ideal.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
