Solvent- based water repellent
Non-silicone solvent-based water repellent
Solvent- based water repellent
Non-silicone solvent-based water repellent
Self-Cleaning Photocatalytic Coating
Self-Cleaning Photocatalytic Coating - SCALP SOLAR ACTIV
Back to products
Professional stone facade mineralizer
Professional stone facade mineralizer - SCALP MINÉRALISANT 95

Solvent-based water repellent – SCALPFUGE OM 70

SCALPFUGE OM 70 is a high-performance solvent-based water repellent designed to provide durable protection for a wide range of mineral substrates, including stone, plaster, gypsum, cement, concrete, brick, marble, tiles, slate, and fibre cement.

Its advanced formula, based on organometallic resins, penetrates deeply into pores without forming a surface film, preserving the natural appearance of the substrate. The treatment forms an invisible, breathable barrier that effectively prevents water ingress, reducing moisture-related issues and freeze/thaw damage.

Ideal for both renovation and preventive applications, SCALPFUGE OM 70 offers long-lasting water repellency for walls, façades, and roofs, ensuring surfaces remain protected from weathering while remaining fully overcoatable and paintable.

Technical Data Sheet
Safety Data Sheet
CALCULATE YOUR CONSUMPTION
Your surface area is m²
For an area of 0 m², you will need 0.00 L*
  • Solvent-based water repellent, silicone-free
  • Invisible and breathable protective layer
  • Rapid, deep penetration into porous substrates
  • Odourless formulation for professional use
  • Excellent performance on plaster, masonry, and stone
  • Fully overcoatable and paintable
  • Protects against water ingress, weathering, and freeze/thaw cycles
  • Preserves natural appearance and substrate porosity

 

  1. Stir SCALPFUGE OM 70 thoroughly before use.
  2. Apply to a clean, dry substrate from bottom to top until fully saturated.
  3. If needed, apply a second coat after 15–20 minutes using the wet-on-wet method.
  4. Allow the product to dry fully — protection becomes effective once completely dry (time may vary with weather conditions).

 

  • SCALPFUGE OM 70 is a silicone-free, solvent-based water repellent intended for protecting façades and roofs.
  • Suitable for stone, plaster, cement, concrete, brick, marble, tiles, slate, and fibre cement.
  • Do not apply to organic coatings (e.g., RPE, RSE paints).
  • Apply only to clean and dry surfaces. If the substrate has been rinsed, allow at least 10 days of drying before treatment.
  • Apply in suitable weather conditions: between +5°C and +50°C. Application is possible up to 70% relative humidity (RH).

 

 

Categories: ,

*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.

Products that may interest you

Gentle Stone Cleaner for Facades
Stone facade cleaner

Gentle Stone Cleaner for Facades – SCALP PIERRE AQUA 89

, , ,
SCALP PIERRE AQUA 89 is a dedicated stone façade cleaner formulated to remove atmospheric pollution and environmental staining. Its next-generation composition delivers highly effective cleaning while fully respecting fragile substrates. Designed for the gentle maintenance of stone façades, it enables fast, easy and noise-free cleaning—without the need for abrasive or intrusive methods. Suitable for a wide variety of mineral surfaces, SCALP PIERRE AQUA 89 is the ideal solution for maintaining immaculate façades with minimal environmental impact. The product can also be applied by drone, offering a safe, efficient and low-logistics approach for hard-to-reach areas.
Quick view
Concrete Cleaner & Cement Residue Remover
Cement veil cleaner

Concrete Cleaner & Cement Residue Remover – SCALP SOL’NET

,

SCALP SOL’NET is a concentrated professional concrete cleaner formulated to remove cement films, laitance, efflorescence and post-construction residues from a wide range of hard surfaces. Designed for demanding cleaning and surface preparation tasks, it rapidly dissolves cement deposits, plaster residue, limescale and salt-based contamination.

Ideal for post-tiling operations and construction site clean-up, this powerful solution eliminates hardened cement build-up — even after several days — restoring surfaces to a clean, ready-to-finish condition.

As a highly effective concrete floor cleaner, SCALP SOL’NET is particularly suitable for preparing floors before coating, painting or sealing, ensuring optimal adhesion and long-lasting results.

Recommended applications include:

  • Removal of cement laitance after grouting tiles or slabs
  • Cleaning cement films from tiles, ceramics, bricks and concrete blocks
  • Elimination of efflorescence and salt deposits
  • Degreasing and preparation of concrete surfaces
Quick view
Professional Limestone & Stone Façade Cleaner
Limestone and mineral facade cleaner

Professional Limestone & Stone Façade Cleaner – SCALP DMC 73

,
SCALP DMC 73 is a professional limestone and stone façade cleaner designed to remove urban pollution, atmospheric deposits, and stubborn dirt from exterior masonry and mineral surfaces. Specially formulated for calcareous stone such as limestone and sandstone, it restores the natural appearance and brightness of building façades without damaging delicate materials. Its ready-to-use formula penetrates deep into the substrate to dissolve encrusted dirt and pollution residues, providing fast and effective façade restoration. Ideal for building maintenance, stone restoration, and heritage cleaning projects, SCALP DMC 73 offers a safe and efficient alternative to abrasive cleaning methods such as sandblasting.
Quick view
Metal surface degreaser & paint adhesion promoter
Degreaser and rust remover for metal surfaces

Metal surface degreaser & paint adhesion promoter – DEROX 320

,
DEROX 320 is a professional metal surface degreaser and paint adhesion promoter designed for preparing metal substrates prior to painting or coating. Specially developed for aluminium, zinc and galvanised steel, this concentrated solution cleans, degreases and activates surfaces to ensure maximum coating performance. Its powerful active formula removes grease, welding residues, light oxides, flux deposits and other contaminants that can compromise adhesion. By creating a perfectly clean and activated substrate, DEROX 320 significantly improves coating durability and prevents common paint defects such as blistering, peeling and flaking.
Quick view
Graffiti Remover for Sensitive Surfaces

Graffiti Remover for Sensitive Surfaces – SCALP SENSITIVE SURFACE CLEANER

,
SCALP SENSITIVE SURFACE CLEANER is a professional graffiti remover designed specifically for delicate and sensitive surfaces. Perfect for areas where conventional cleaners are too harsh, it safely removes ink, markers, and paint tags. Ideal for :
  • Wood (treated or untreated)
  • Vehicle panels
  • Road signage
  • Surfaces protected with VERNAEAU PU 16 permanent anti-graffiti coatings
Quick view

    You may be interested in

      Where to buy our products ?

      Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.

      Please contact us for more information :