04
Mar
SCALP ANTI-M 3100
SCALP ANTI-M 3100 is a 2-in-1 product
- A biocide and algaecide, it protects surfaces against algae, lichens, and green deposits in no time. It takes effect in two hours and provides long-lasting protection for 2 to 5 years, depending on the climate.
- Water-repellent, SCALP ANTI-M 3100 protects against water infiltration and limits urban grime. It can be used on roofs, facades, walls, and outdoor floors, as a finish on new construction or renovation projects.
It is perfectly suited to surfaces such as tiles, slates, fiber cement, shingles, stone, mineral coatings, bricks, plaster, concrete, roughcast, thick plastic coatings, wood, etc.
Use by drone allows for quick, even, and safe application without direct contact with the surface.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- 2-in-1 product: biocide and water repellent
- Economical and practical product
- Ultra-fast product, flash effect
- Ideal for all surfaces
- Preventive solution
- Very long-lasting, over 2 years (depending on climate)
- VOC-free
- No rinsing required
- Concentrated water-based product
- Sprayable: formula perfectly compatible with drone spraying
- Drone application = Increased safety, time savings, uniform spraying, cost reduction
- Does not damage materials or application equipment
Step 1
Homogenize SCALP ANTI-M 3100.
Step 2
Apply the product until saturated on a dry surface.
Step 3
Leave to act. If there is a thick layer of microorganisms, use a mechanical means to remove them. The treated surface will regain a clean appearance after 2 hours. Never rinse after application.
SCALP ANTI-M 3100 is a professional biocide and water repellent treatment designed to provide long-lasting protection for exterior surfaces against biological attack and water infiltration. Ultra-effective, it protects against algae, lichens, and green deposits in just two hours and acts preventively for up to 5 years, depending on weather conditions.
Versatile, SCALP ANTI-M 3100 can be applied as a finish on new buildings and renovations, on a wide variety of materials: tiles, slates, mineral coatings, stones, bricks, roughcast, concrete, wood, or plastic coatings. It is ideal for treating roofs, facades, walls, and outdoor floors, even those exposed to the elements and urban pollution.
In addition to its preventive action against microorganisms, SCALP ANTI-M 3100 acts as an effective water repellent, creating an invisible barrier against moisture. It thus prevents water infiltration, reduces fouling, and slows down the premature aging of materials.
Formulated in an aqueous phase, this concentrated treatment does not require rinsing. It is simply applied using a sprayer, roller, or brush to a clean, dry surface, impregnating it completely until saturation.
SCALP ANTI-M 3100 is the ideal professional solution for extending the life of materials. Its dual biocide + water-repellent action makes it an essential ally in the long-term protection of buildings.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® EKO’R
SCALPEX® EKO’R, a biodegradable gel-based facade stripper, removes paint, RPE, Imper, and thin films from plaster, concrete, stone, and brick surfaces. Its gel formula and texture make it easy to apply with a roller, brush, or pneumatic sprayer. SCALPEX® EKO’R is effective after 40 minutes, depending on the type and thickness of the coating.
LESSIVE + EKO’R
LESSIVE + EKO’R is a cleaner and degreaser for surfaces that may come into contact with foodstuffs. It is formulated from plant-based and bio-sourced raw materials. It is an ideal degreaser for cleaning and degreasing small equipment, machine parts, and surfaces that may come into contact with foodstuffs.
This cleaner, made from biodegradable raw materials in accordance with OECD standards, effectively removes grease from surfaces in industrial kitchens, dining rooms, hotels, canteens, communal areas, etc. Non-aggressive and non-corrosive, it cleans and degreases mineral surfaces such as tiles, porcelain stoneware, marble, etc. LESSIVE + EKO'R can also be applied by drone for fast, even, and safe application without direct contact with the surface.
SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel-based facade stripper designed to effectively remove paint, waterproofing agents, thin RPE films, and graffiti from various surfaces (plaster, concrete, stone, wood, etc.). Thanks to its “flash effect” formula, it works in 15 to 60 minutes, depending on the coating. Ready to use, it is easy to apply with a brush or airless sprayer. Odorless, non-toxic, and non-harmful, SCALPEX® SD+ is ideal for fast and powerful stripping on vertical surfaces.
SCALPEX® NW NG
SCALPEX® NW NG is an ultra-efficient gel paint stripper designed to thoroughly remove paint, varnish and stain from a wide variety of substrates: wood, woodwork, iron, zinc, concrete, stone and more. Thanks to its gel formula, it adheres perfectly to vertical surfaces without running, making it an essential ally for all interior and exterior renovation work.
This gel stripper is ideal for stripping stairs, window frames, joinery, panels, furniture and other delicate surfaces. Suitable for both renovation and routine stripping jobs.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
