04
Mar
SCALP ANTI-M
SCALP ANTI-M is a preventive anti-green deposit treatment, ideal for providing long-lasting protection against green deposits, algae, lichens, and microorganisms on roofs, facades, floors, and walls. It can be applied to materials commonly found in buildings (tiles, slates, fiber cement, shingles, stones, mineral coatings, bricks, plaster, concrete, roughcast, thick plastic coatings, wood). By forming a protective barrier, SCALP ANTI-M prevents the reappearance of these organisms (algae, microorganisms, lichens) and thus prolongs the life of the treated surfaces. The treated surface regains a healthy appearance under the action of rain and wind.
Use by drone allows for quick, even, and safe application without direct contact with the surface.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- No-rinse treatment
- Easy to apply
- Ideal for all surfaces
- Preventive product
- EXCELL+ certified product
- Very long-lasting, over 2 years (depending on climate)
- VOC-free
- No rinsing required
- Cleans and provides long-lasting protection
- Water-based impregnation product
- Sprayable: formula perfectly compatible with drone spraying
- Drone application = Increased safety, time savings, uniform spraying, cost reduction
- Does not damage materials or application equipment
Step 1
Mix SCALP ANTI-M thoroughly.
Step 2
Apply the product to a dry surface from bottom to top until saturated.
Step 3
Leave to act. If there is a thick layer of microorganisms, use a mechanical means to remove them. The treated surface will regain a clean appearance after a few weeks. Never rinse after application.
SCALP ANTI-M is a professional anti-green deposit treatment designed to provide long-lasting protection against green deposits, algae, lichens, and microorganisms on exterior building surfaces. Formulated in an aqueous phase, this disinfectant and algaecide acts deeply while preserving the treated surfaces.
Versatile and effective, SCALP ANTI-M is perfectly suited to all materials found on facades, roofs, and floors: tiles, slates, mineral coatings, bricks, roughcast, plaster, natural stone, concrete, wood, and even thick plastic coatings. It can be used for both renovation and finishing on new constructions.
Its dual action—cleaning and protecting—guarantees optimal results from the very first weeks, without the need for rinsing. Thanks to the natural action of rain and wind, residues gradually disappear, leaving a clean, healthy surface ready to be painted or coated. SCALP ANTI-M provides long-lasting protection for up to 5 years, thus limiting the appearance of new biological contamination.
Easy to apply, this treatment can be used with a sprayer, roller, or brush, completely impregnating the surface from bottom to top. Mix the product thoroughly before use and apply it to a perfectly dry surface. In the case of thick layers of moss, mechanical cleaning may be necessary for optimal results.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® AL 23
SCALPEX® AL 23 is a lead paint stripping gel designed for removing lead paint and silicate and asbestos-based coatings. It is ideal for stripping interior walls, stairwells, corridors, bedrooms, kitchens, etc.
This alkaline gel stripper is ideal for complying with legislation on the renovation of buildings and apartments. It is an exceptional stripper for silicate, asbestos, and lead because it does not generate dust. Its stripping action is gradual and very effective. This lead paint stripper gel can strip several layers of paint in a single pass.
SCALP RENOV’EXPRESS®
SCALP RENOV'EXPRESS® is an ultra-efficient professional cleaner for cleaning and renovating facades, roofs, floors and walls. It quickly and lastingly removes dirt, atmospheric pollution, encrusted residues and black marks, giving even the dirtiest surfaces a new lease of life.
Versatile, it can be used on a wide variety of materials: stone, brick, concrete, cement, fibrocement, slate, tiles, etc. It is also compatible with many types of coating, whether organic, mineral, lime-based or hydraulic, including thick plastic coatings (RPE) and semi-thick coatings.
SCALPNET® AQUA 37
SCALPNET® AQUA 37 is a thixotropic gel cleaner for brick facades. It removes black atmospheric soiling from all mineral or silica-laden surfaces. This facade cleaner is ideal for brick facades. SCALPNET® AQUA 37 is particularly recommended for cleaning fragile materials such as brick, concrete, porcelain, stoneware and glass paste. This brick facade cleaner is ideal for cleaning jobs where environmental constraints are important. SCALPNET® AQUA 37 is perfect for cleaning brick facades in high-traffic areas. It can also be applied by drone, offering a practical and safe solution for hard-to-reach surfaces.
SCALP PRONET
SCALP PRONET is a multi-purpose facade shampoo, specially formulated to clean, degrease and remove grease from heavily soiled surfaces. It effectively removes dirt, grease and pollution from a wide range of surfaces, including facades, cladding, floors and paving.
Thanks to its concentrated formula, this facade shampoo is ideal for intensive washing or pre-painting operations. It acts quickly to restore surface cleanliness, while ensuring better adhesion of future paints or coatings.
Whether your surfaces are mineral or organic, painted or unpainted, SCALP PRONET adapts to every situation.
SCALP SOL’NET
SCALP SOL'NET is a concentrated professional cleaner specially designed to remove cement films, laitance, efflorescence and end-of-job marks from a multitude of surfaces. Ideal for cleaning after tiling, it effectively removes cement residues, plaster, tartar and saltpetre.
SCALP SOL'NET quickly dissolves cement deposits, even when they have been hardened for several days. It is particularly recommended for :
- Cleaning cement laitance after grouting tiles or slabs
- Removing cement films from hard surfaces (tiles, ceramics, bricks, breeze blocks, etc.)
- Removal of efflorescence and cement build-up
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
