SCALP SOL’NET
SCALP SOL’NET is a concentrated professional cleaner specifically formulated to remove cement films, laitance, efflorescence and post-construction residues from a wide variety of surfaces. Perfect for post-tiling cleaning, it effectively eliminates cement deposits, plaster residues, limescale, and salt residues (saltpeter/efflorescence).
SCALP SOL’NET quickly dissolves cement build-up, even when hardened for several days. It is especially recommended for :
- Cleaning cement laitance after grouting tiles or slabs
- Removing cement films from hard surfaces such as tiles, ceramics, bricks, and concrete blocks/breeze blocks.
- Eliminating efflorescence and cement deposits
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Fast-acting, powerful and effective
- Ready-to-use with flexible dilution options
- Multi-purpose and concentrated
- Removes and dissolves oil and hydrocarbon-based soils
- Low odour
- Very low VOC content (1.2 g/L)
- Dual-action: post-construction cleaning and floor preparation
- Strong degreasing effect on heavily soiled concrete floors
- Dilution : SCALP SOL’NET can be used undiluted or diluted up to 1 part product to 5 parts water, depending on the degree of soiling and the sensitivity of the substrate.
- Surface Preparation : Moisten the surface thoroughly before application.
- Application : Apply the product evenly and leave for 5–10 minutes. Mechanical action can be used to speed up cleaning.
- Rinsing : Rinse thoroughly with pressurised water before the product fully dries (critical).
- Repeat if Necessary : For stubborn deposits, repeat the procedure.
- Suitable for post-construction cleaning of hard surfaces: tiles, ceramics, bricks, cinder blocks, etc.
- Ideal for preparing concrete floors before painting or coating
- Effective on hydrocarbon-soiled areas such as service stations, workshops, garages, and industrial floors
- Do not use on acid-sensitive materials (e.g., limestone, marble, terracotta).
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
LESSIVE + EKO’R
LESSIVE + EKO’R is a powerful cleaner and degreaser designed for surfaces that may come into contact with food. Made from plant-based and bio-sourced raw materials, it is ideal for cleaning and degreasing small equipment, food preparation surfaces, and machine parts.
Formulated from readily biodegradable ingredients in line with OECD standards, LESSIVE + EKO’R effectively removes grease and dirt in industrial kitchens, restaurants, canteens, hotels, and communal areas. Non-aggressive and non-corrosive, it is suitable for cleaning mineral surfaces such as tiles, porcelain stoneware, and marble. For large industrial/communal areas, the product can also be applied using a drone, ensuring safe, even, and rapid application without direct contact with the surface.
SCALP ANTI-M
SCALP ANTI-M is a preventive treatment designed to protect exterior surfaces against green deposits, algae, lichens, and microorganisms. Ideal for roofs, facades, walls, and floors, it can be applied to a wide range of common building materials, including tiles, slates, fiber cement, shingles, stones, mineral coatings, bricks, plaster, concrete, roughcast, thick plastic coatings (RPE/RSE), and wood.
By forming a protective barrier, SCALP ANTI-M prevents the regrowth of these organisms, helping to extend the lifespan of treated surfaces. The treatment gradually restores a clean, healthy appearance under the natural action of rain and wind.
Drone application allows for fast, even, and safe coverage without direct contact with the surface.
SCALP PIERRE AQUA 89
SCALP PIERRE AQUA 89 is a dedicated stone façade cleaner formulated to remove atmospheric pollution and environmental staining. Its next-generation composition delivers highly effective cleaning while fully respecting fragile substrates. Designed for the gentle maintenance of stone façades, it enables fast, easy and noise-free cleaning—without the need for abrasive or intrusive methods.
Suitable for a wide variety of mineral surfaces, SCALP PIERRE AQUA 89 is the ideal solution for maintaining immaculate façades with minimal environmental impact. The product can also be applied by drone, offering a safe, efficient and low-logistics approach for hard-to-reach areas.
DEROX 320
DEROX 320 is a professional degreaser and rust remover designed for preparing metal surfaces prior to painting. Perfect for aluminum, zinc, and galvanized steel, this highly concentrated product cleans, degreases, and deeply prepares substrates to ensure optimal paint adhesion.
Its active formula efficiently removes welding scale/flux residues, grease, light oxides and other contaminants that can compromise paint performance. By creating a perfectly clean base, DEROX 320 prevents common paint defects such as blistering, peeling, or flaking.
SCALP SOLAR ACTIV
SCALP SOLAR ACTIV’ is an innovative, eco-friendly mineral stain that transforms exterior surface maintenance through its advanced, self-sanitising photocatalytic technology. Designed to harness the power of sunlight, this treatment uses UV rays to break down organic and biological soiling, keeping surfaces clean over time.
Its self-cleaning mechanism actively prevents the growth of micro-organisms (algae, moss, lichen, etc.) while preserving the natural appearance of the substrate. SCALP SOLAR ACTIV’ forms an invisible protective film that limits soiling and significantly reduces the need for regular cleaning—saving time, effort and resources.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
