Metal surface degreaser & paint adhesion promoter
Degreaser and rust remover for metal surfaces
Degreaser and rust remover for metal surfaces
Watch video
Metal surface degreaser & paint adhesion promoter
Degreaser and rust remover for metal surfaces
Degreaser and rust remover for metal surfaces
Aluminium & stainless steel cleaner & passivator
Aluminium & stainless steel cleaner & passivator - SCALPINOX D
Back to products
Professional Limestone & Stone Façade Cleaner
Professional Limestone & Stone Façade Cleaner - SCALP DMC 73

Metal surface degreaser & paint adhesion promoter – DEROX 320

DEROX 320 is a professional metal surface degreaser and paint adhesion promoter designed for preparing metal substrates prior to painting or coating. Specially developed for aluminium, zinc and galvanised steel, this concentrated solution cleans, degreases and activates surfaces to ensure maximum coating performance.

Its powerful active formula removes grease, welding residues, light oxides, flux deposits and other contaminants that can compromise adhesion. By creating a perfectly clean and activated substrate, DEROX 320 significantly improves coating durability and prevents common paint defects such as blistering, peeling and flaking.

Technical Data Sheet
Safety Data Sheet
CALCULATE YOUR CONSUMPTION
Your surface area is m²
For an area of 0 m², you will need 0.00 L*
  • Professional metal surface preparation cleaner for painting and coating systems
  • Powerful degreasing and metal etching action
  • Promotes optimal paint adhesion and coating performance
  • Removes welding residues, grease, oxides and surface contaminants
  • Prevents finishing defects: blistering, peeling and flaking
  • Highly concentrated and versatile formulation
  • Fast-acting and easy to apply
  • Low odour formulation
  • Low VOC content
  • Suitable for aluminium, zinc and galvanised steel surfaces

Dilution :

  • Aluminium: use neat.
  • Zinc and galvanised steel: dilute 1:1 with water.
  1. Application
    Apply evenly to the metal surface and allow to act for 5–10 minutes, depending on the required level of surface activation.
  2. Mechanical Action
    Scrub using a brush if necessary.
  3. Rinsing
    Rinse thoroughly using pressurised water or a high-volume water flow.
  • Ideal for industrial metal surface preparation prior to painting or coating.
  • Ensures optimal adhesion and long-lasting coating performance.
  • Always carry out a preliminary test on a small, inconspicuous area.
  • Do not use on calcareous or non-metallic substrates.

 

 

 

Categories: ,

*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.

Products that may interest you

Biodegradable Gel Paint Stripper
SCALPEX EKO’R bio-sourced gel paint stripper

Biodegradable Gel Paint Stripper – SCALPEX® EKO’R

, ,

SCALPEX® EKO’R is a biodegradable, gel-based façade stripper formulated for the rapid and safe removal of:

  • Paints (including old lead-based layers)
  • Textured coatings (RPE/RSE)
  • Waterproofing films
  • Thin layers on plaster, concrete, stone, and brick

Its gel texture ensures precise application without drips, making it perfect for vertical surfaces and façades. SCALPEX® EKO’R can be applied with a roller, brush, or pneumatic sprayer, and begins acting in as little as 40 minutes, depending on coating type and thickness.

Quick view
Ultra-Fast Gel Paint Remover for Façades
SCALPEX SD+ - Gel facade stripper

Ultra-Fast Gel Paint Remover for Façades – SCALPEX® SD+

,

SCALPEX® SD+ is an ultra-fast gel paint stripper designed to efficiently remove paints, waterproofing systems, thin RPE coatings, and graffiti from a wide range of exterior surfaces, including render, concrete, stone, brick, wood, and mineral substrates.

Thanks to its innovative “flash effect” formula, it softens coatings in just 15–60 minutes depending on thickness. Ready to use, this gel paint remover is simple to apply with a brush or airless sprayer. Odourless and DCM-free, SCALPEX® SD+ is ideal for rapid, high-performance stripping on vertical façades and exterior walls.

Quick view
Professional Limestone & Stone Façade Cleaner
Limestone and mineral facade cleaner

Professional Limestone & Stone Façade Cleaner – SCALP DMC 73

,
SCALP DMC 73 is a professional limestone and stone façade cleaner designed to remove urban pollution, atmospheric deposits, and stubborn dirt from exterior masonry and mineral surfaces. Specially formulated for calcareous stone such as limestone and sandstone, it restores the natural appearance and brightness of building façades without damaging delicate materials. Its ready-to-use formula penetrates deep into the substrate to dissolve encrusted dirt and pollution residues, providing fast and effective façade restoration. Ideal for building maintenance, stone restoration, and heritage cleaning projects, SCALP DMC 73 offers a safe and efficient alternative to abrasive cleaning methods such as sandblasting.
Quick view
Wet look water & oil repellent
Water repellent wet look

Wet look water & oil repellent – SCALP ANTI-TACHES EM

, , ,
SCALP ANTI-TACHES EM is a professional-grade treatment designed to restore the appearance of porous materials while providing long-lasting protection against stains and moisture. This high-performance product enhances colour and gives surfaces a durable “wet look” (colour-enhanced) finish, all without forming a film. Acting as an invisible barrier, it protects against water penetration, grease and oil stains, and spills from everyday liquids such as wine, coffee, or tannin. It also prevents the infiltration of urban and organic pollution. SCALP ANTI-TACHES EM helps inhibit the growth of microorganisms, reducing the appearance of green deposits, algae, and organic residue on treated surfaces. Particularly suited to porous horizontal surfaces, it is ideal for roofs, terraces, balconies, driveways, pool surrounds, exterior steps, and more. It can be easily applied to a wide range of materials including tiles, block paving, terracotta, natural and reconstituted stone, marble, cement, and concrete. SCALP ANTI-TACHES EM can also be applied by drone—an efficient solution for large or difficult-to-reach areas, ensuring fast, uniform, and safe application.  
Quick view
Professional Graffiti Removal Product

Professional Graffiti Removal Product – SCALP GRAFFITI REMOVER

,
SCALP GRAFFITI REMOVER is a professional, intensive graffiti removal product formulated to remove graffiti from mineral surfaces including stone, concrete, granite, marble, slate, and even porous wood. Its formula tackles spray paint, ink, markers, varnish, and lacquer, restoring walls, façades, monuments, and urban infrastructure to their original condition.
Quick view

    You may be interested in

      Where to buy our products ?

      Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.

      Please contact us for more information :