04
Mar
STRIPAC NI BASE ECO
STRIPAC NI BASE ECO is an immersion paint stripper specifically designed for aluminum. This cold-bath product works effectively at room temperature, in combination with the STRIPAC additive, to remove welding residue (oxides), surface impurities, and a wide range of coatings including epoxy, polyester, alkyd (or glycerophthalic), vinyl, acrylic, lasures, varnishes, and primers.
Thanks to its concentrated formula, STRIPAC NI BASE ECO dissolves resins and modifies mineral pigments while preserving aluminum’s corrosion resistance. It is gentle on sensitive substrates such as steel, aluminum, and wood, making it an ideal solution for delacquering aluminum profiles.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Effectively strips a wide range of paints and coatings
- Works at room temperature, no heating required
- Safe on substrates including aluminum, steel, and wood
- Cold-bath immersion for consistent and thorough action
- Fill a suitable tank with STRIPAC NI BASE ECO.
- Add STRIPAC ADDITIVE according to the technical recommendations.
- Stir the bath to ensure uniform action.
- Immerse the parts to be stripped (aluminum, steel, or wood).
- Leave the parts in the bath until the coating has completely softened or degraded.
- Rinse thoroughly with clean water or a high-pressure washer.
- Carry out a suitable post-stripping surface treatment (e.g., passivation) for metal parts before repainting.
- STRIPAC NI BASE ECO is especially recommended for delacquering aluminum profiles.
- Its chemical action efficiently removes paint layers, welding oxides, and surface contaminants.
- For immersion use only, in combination with STRIPAC ADDITIVE, in suitable tanks.
- Guarantees effective stripping without damaging sensitive, non-ferrous substrates.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPIK® L13S
SCALPIK® L13S is a chlorinated liquid paint stripper designed for cold-bath immersion stripping of all types of paints and varnishes. Its liquid formulation enables deep penetration through multiple layers, causing coatings to lift and peel away without damaging the underlying substrate.
This cold-bath stripper is suitable for a wide range of materials, including wood, metal, steel and aluminium. It is ideal for industrial sectors requiring powerful, consistent stripping performance, even on complex parts or hard-to-reach surfaces.
HYPRASTRIP B 604
HYPRASTRIP B604 is a high-performance paint stripper specifically formulated for hot-dip stripping of ferrous substrates (steel/iron). Its powerful alkaline composition enables the removal of thick, multi-layered or highly resistant coatings, even in the most challenging stripping conditions. Thanks to its deep-acting properties, this dip stripper is an ideal solution for preparing ferrous metal surfaces ahead of new treatments or coatings.
This product is not suitable for light alloys such as aluminium, zinc or copper.
ACTIVATOR SCALPIK L12S
SCALPIK L12S ACTIVATOR is a technical additive designed to complement a SCALPIK L12S-based stripping bath. While it has no stripping power on its own, it is formulated to restore the efficiency of a stripping bath that has begun to lose performance.
Chlorinated paint strippers like SCALPIK L12S can lose effectiveness over time due to factors such as frequent use, bath temperature, or exposure to air. SCALPIK L12S ACTIVATOR compensates for this loss, reactivating the bath and restoring its original properties.
NST PRO 61
NST PRO 61 is a professional industrial cleaner and degreaser designed for mechanical components. Formulated with aliphatic hydrocarbons, it efficiently removes oils and greases from metal surfaces, including bearings, balls, engine parts, and tooling/steel molds. Its high-performance cleaning makes it an ideal choice for industries requiring precision and reliability, such as automotive, aerospace, and mechanical engineering.
SCALPROTECT 31
SCALPROTEC 31 is a protective oil for metal surfaces, formulated with corrosion inhibitors dissolved in refined mineral oil. It provides temporary anti-corrosion protection for 3 to 9 months, depending on storage conditions.
This versatile product is suitable for a wide range of metals, including cast iron, steel, aluminium alloys, magnesium alloys, copper and zinc. SCALPROTEC 31 is widely used across industrial sectors such as automotive, aerospace and oil industries, notably for protecting spare parts, metal pipes (interiors) and sheet metal prior to stamping or other processing operations.
Ready-to-use, SCALPROTEC 31 can be easily applied by immersion, spraying, brushing or wiping.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
