04
Mar
AQUAFUGE® 18
AQUAFUGE® 18 is a professional-grade, colorless water repellent specially formulated for the long-lasting protection of porous materials, including blue stone, limestone, concrete, cement, fiber cement, and lime. Thanks to its high penetration power, it creates an invisible barrier that effectively blocks water penetration while allowing the substrate to breathe.
Ideal for preserving the aesthetics and durability of bluestone, a noble material often used in facades or flooring, AQUAFUGE® 18 protects against moisture, freeze/thaw cycles, water infiltration, urban dirt, and the development of microorganisms. Its water-repellent action also prevents degradation of the substrate and helps to extend its life.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Silicone water repellent for blue stone
- Very pronounced beading effect
- Limits damage caused by frost
- Ideal protection for blue stone
- Does not change the appearance or porosity of the substrate
- Solvent-free and odorless water repellent
- Microporous: easy and quick impregnation into the pores of materials
- Colorless water repellent
- Sprayable
- Prevents surface fouling and limits the formation of microorganisms
- Can be applied to slightly damp surfaces
- VOC-free
Step 1
Mix AQUAFUGE® 18 thoroughly.
Step 2
Apply to the surface to be treated from bottom to top until the surface is saturated.
Step 3
Apply one or two coats at 10-minute intervals. Avoid overloading the product, which may cause dripping and leave marks.
Step 4
The water repellency will be effective as soon as AQUAFUGE® 18 is completely dry, within one to several hours.
- AQUAFUGE® 18 is particularly recommended for blue stone: it offers powerful protection.
- AQUAFUGE® 18 is not recommended for use on surfaces such as bricks and tiles.
- The product must be applied to a clean, sound and preferably dry surface.
- Application must be carried out in dry weather, at a temperature between 5°C and 50°C.
- The water repellent effect will be effective immediately after AQUAFUGE® 18 has completely dried (one to several hours).
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPNET® AQUA 37
SCALPNET® AQUA 37 is a thixotropic gel cleaner for brick facades. It removes black atmospheric soiling from all mineral or silica-laden surfaces. This facade cleaner is ideal for brick facades. SCALPNET® AQUA 37 is particularly recommended for cleaning fragile materials such as brick, concrete, porcelain, stoneware and glass paste. This brick facade cleaner is ideal for cleaning jobs where environmental constraints are important. SCALPNET® AQUA 37 is perfect for cleaning brick facades in high-traffic areas. It can also be applied by drone, offering a practical and safe solution for hard-to-reach surfaces.
SCALP SOL’NET
SCALP SOL'NET is a concentrated professional cleaner specially designed to remove cement films, laitance, efflorescence and end-of-job marks from a multitude of surfaces. Ideal for cleaning after tiling, it effectively removes cement residues, plaster, tartar and saltpetre.
SCALP SOL'NET quickly dissolves cement deposits, even when they have been hardened for several days. It is particularly recommended for :
- Cleaning cement laitance after grouting tiles or slabs
- Removing cement films from hard surfaces (tiles, ceramics, bricks, breeze blocks, etc.)
- Removal of efflorescence and cement build-up
SCALP DMC 73
SCALP DMC 73 is a professional cleaner designed for limestone facades and other mineral surfaces exposed to urban soiling. Its powerful action restores a natural shine to your surfaces, while effectively removing atmospheric pollution and stubborn stains. Easy to apply, it guarantees impeccable results without damaging delicate materials, ideal for long-term facade maintenance.
SCALP FAÇADE CLEANER 2
SCALP FAÇADE CLEANER 2 is a professional brick facade cleaner designed for cleaning brick surfaces and other siliceous materials. Thanks to its concentrated formula, it effectively removes dirt, urban pollution and encrusted impurities.
SCALP FAÇADE CLEANER 2 is not limited to brick. It's equally effective on stoneware, concrete, ceramics, glass paste and mignonettes.
SCALP ANTI-TACHES EM
SCALP ANTI-TACHES EM is a professional treatment specially formulated to restore the appearance of materials while effectively protecting them against stains and moisture. This high-performance product provides a long-lasting wet look, restoring color and shine to your dull surfaces without forming a film on the surface.
It acts as an invisible barrier against water infiltration, grease stains, food liquids (wine, coffee, oil, tannin, etc.) and prevents urban or organic pollution from penetrating the surfaces. SCALP ANTI-TACHES EM is also effective against the development of microorganisms, thus limiting the appearance of green deposits and algae on treated surfaces.
Particularly recommended for porous horizontal surfaces, it is ideal for roofs, terraces, balconies, driveways, pool decks, outdoor stairs, etc. It is easy to apply to a wide variety of materials such as tiles, interlocking pavers, terracotta tiles, natural or reconstituted stone, marble, cement, concrete, etc. It can also be applied by drone, an ideal solution for hard-to-reach areas or large surfaces, ensuring fast, even, and safe application.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
