FR
ES
DE
NL
PL
PT
Biocide Treatment Booster & Pollution Cleaner – SCALP ACCELERATOR-M
SCALP ACCELERATOR M is a biocide treatment booster designed to maximise the efficiency of algaecide and biocide applications. Enriched with advanced detergent agents, it enhances the penetration of active ingredients into the heart of microorganisms such as algae, lichens, and green deposits, delivering more powerful, and targeted cleaning.
Used in combination with SCALP ANTI-M or SCALP ANTI-M 3100, this additive extends the treatment’s action to tackle greasy dirt, soot, black marks, and residues from atmospheric pollution. The result is quicker visible cleaning and enhanced surface protection.
- Enhances the effectiveness of algaecide and biocide treatments
- Boosts action on grease, soot, black marks, and atmospheric pollution residues
- Delivers faster visible results
- Concentrated detergent formula with degreasing and cleaning effect
- Chlorine-free and VOC-free
- No rinsing required
- Compatible with SCALP ANTI-M and SCALP ANTI-M 3100 treatments
- Dilute 1 litre of SCALP ACCELERATOR-M in 8–10 litres of ready-to-use biocide treatment (10% mixture). Mix thoroughly before application.
- Apply the mixture generously to completely dry surfaces until fully saturated, avoiding excessive run-off. Leave to act.
For thick layers of algae or lichens, mechanical removal (stiff brush or low-pressure washer) may be used to assist cleaning. The treated surface will show visible improvement within a few days. Do not rinse after application.
- Recommended Dilution: 10% mixture with biocide treatment
- Action Time: Leave to act until dirt and deposits disappear; results visible within a few days
- Application Equipment: Sprayer, roller, or brush
- Application Temperature: 5°C to 50°C
- Tool Cleaning: Rinse tools with water immediately after use
- Coverage: Depends on the biocide treatment used
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
Ultra-Powerful Façade & Roof Cleaner – SCALP RENOV’EXPRESS®
SCALP RENOV’EXPRESS® is an ultra-powerful professional cleaner engineered for intensive building facade cleaning and surface renovation. Its high-performance formula rapidly removes stubborn dirt, atmospheric pollution, black staining and persistent residues, restoring heavily weathered surfaces to a clean, refreshed condition.
This advanced cleaner is highly versatile and suitable for façades, roofs, floors and external walls. It delivers reliable results across a wide range of substrates, including stone, brick, concrete, fibre cement, slate and tiles, as well as organic, mineral, lime-based and hydraulic coatings.
Concrete Cleaner & Cement Residue Remover – SCALP SOL’NET
SCALP SOL’NET is a concentrated professional concrete cleaner formulated to remove cement films, laitance, efflorescence and post-construction residues from a wide range of hard surfaces. Designed for demanding cleaning and surface preparation tasks, it rapidly dissolves cement deposits, plaster residue, limescale and salt-based contamination.
Ideal for post-tiling operations and construction site clean-up, this powerful solution eliminates hardened cement build-up — even after several days — restoring surfaces to a clean, ready-to-finish condition.
As a highly effective concrete floor cleaner, SCALP SOL’NET is particularly suitable for preparing floors before coating, painting or sealing, ensuring optimal adhesion and long-lasting results.
Recommended applications include:
- Removal of cement laitance after grouting tiles or slabs
- Cleaning cement films from tiles, ceramics, bricks and concrete blocks
- Elimination of efflorescence and salt deposits
- Degreasing and preparation of concrete surfaces
Professional brick & siliceous masonry cleaner – SCALP FACADE CLEANER 2
SCALP FACADE CLEANER 2 is a masonry cleaner designed for professional cleaning of brick, sandstone, and siliceous surfaces. Its concentrated formula penetrates deeply to remove stubborn dirt, urban pollution, and atmospheric encrustations, restoring the natural look of facades.
Beyond brick, this versatile cleaner works effectively on stoneware, concrete, ceramics, glass paste, and small-format stones, making it ideal for a wide range of siliceous substrates in both renovation and maintenance projects.
Self-Cleaning Photocatalytic Coating – SCALP SOLAR ACTIV
SCALP SOLAR ACTIV’ is an innovative, eco-friendly photocatalytic coating designed to transform exterior surface maintenance. Using sunlight, its UV-activated technology breaks down organic and biological dirt, keeping walls, facades, and other surfaces cleaner for longer.
The invisible, breathable film preserves the natural appearance of substrates while actively preventing micro-organism growth, including algae, moss, lichen, and more. By limiting surface soiling, SCALP SOLAR ACTIV’ reduces the need for frequent cleaning, saving time, water, and effort, while cutting down the use of harsh cleaning chemicals.
Graffiti Remover for Sensitive Surfaces – SCALP SENSITIVE SURFACE CLEANER
- Wood (treated or untreated)
- Vehicle panels
- Road signage
- Surfaces protected with VERNAEAU PU 16 permanent anti-graffiti coatings
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
