04
Mar
SCALP WATERPROOF BARRIER
SCALP WATERPROOF BARRIER is a hybrid waterproofing membrane. In the form of a fibrous paste, it creates a waterproof, elastic, non-adhesive barrier that is resistant to water, cracks and weathering.
Versatile, it provides effective, long-lasting protection for roofs, gutters, terraces, cornices, pipes and chimney bases. Its great flexibility allows it to adapt to structural movements without cracking, even under the effects of UV rays and extreme climatic variations.
Compatible with a wide range of substrates, including PVC, galvanized steel and iron, it requires no additional coating.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Ultra-strong, flexible hybrid waterproofing membrane: resists light and weather
- Long-lasting protection against water, UV, rain and snow.
- High flexibility: absorbs movement without cracking.
- Multi-supports: roofs, gutters, terraces, chimneys, pipes.
- Can be applied in all types of weather
- Repairs cracks and strengthens joints
- Ready-to-use product
- Recoatable product
- Ideal for exterior use
- Non-sticky
- Low VOC
Step 1
Ready-to-use product. Apply SCALP WATERPROOF BARRIER to a clean, dry substrate.
- Application to iron: remove all traces of rust and degrease the substrate. Apply a coat of anti-rust primer, then SCALP WATERPROOF BARRIER.
- Application on iron or galvanized steel: degrease the substrate, then apply SCALP WATERPROOF BARRIER directly.
Step 2
Clean the substrate to be repaired of all dust, mud, grease deposits, dead leaves, etc.
Clean the surface, then apply SCALP WATERPROOF BARRIER directly. Blot the surface then apply the product directly.
Step 3
Recoatable if necessary after 12-24 hours depending on outside temperature.
Drying time: 4H to touch.
- Ready-to-use product
- Ideal application temperature: between 5°C and 40°C.
- Storage: keep frost and heat away, in its original closed packaging.
- Life expectancy: 6 months from date of manufacture.
- Tools should be cleaned with water immediately after use.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALP FACANET PAE
SCALP FACANET PAE is a powerful, no-rinse cleaner designed to scrub and clean exterior facades, roofs, walls and floors. It is specially formulated to remove deposits associated with urban air pollution, such as soot, dust and fine particles. Versatile, SCALP FACANET PAE is suitable for a wide variety of surfaces, including stone, brick, cement, concrete, fibre cement and hydraulic and organic plasters. This cleaner restores the original appearance of exterior materials in depth while preserving them, thus extending their lifespan. It can also be applied by drone, an ideal solution for hard-to-reach areas or large surfaces, guaranteeing fast, even and safe application.
NET ENZYME EKO’R
New generation enzymatic cleaner, ideal for maintaining facades, roofs, walls, and outdoor floors. Non-corrosive, this product uses the synergy between bacteria and enzymes to eliminate organic matter present in urban environments. Formulated without harsh chemicals, NET ENZYME EKO'R contains no soda, acid, or solvents. It ensures professional quality and optimized performance.
With an innovative formula based on enzymes and bacteria, NET ENZYME EKO'R acts deeply and curatively. It thus ensures long-lasting descaling that keeps your surfaces clean for several years
SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel-based facade stripper designed to effectively remove paint, waterproofing agents, thin RPE films, and graffiti from various surfaces (plaster, concrete, stone, wood, etc.). Thanks to its “flash effect” formula, it works in 15 to 60 minutes, depending on the coating. Ready to use, it is easy to apply with a brush or airless sprayer. Odorless, non-toxic, and non-harmful, SCALPEX® SD+ is ideal for fast and powerful stripping on vertical surfaces.
SCALP AQUA 03
SCALP AQUA 03 is an ultra-polyvalent professional degreasing cleaner designed for cleaning and washing all synthetic surfaces used in the building industry, both indoors and out. Thanks to its ammonia-, acid- and chlorine-free formula, it can be used on materials such as PVC, aluminum, zinc, painted surfaces, cladding and many others. Its degreasing power easily removes greasy residues, dust, traces of glue, soot, etc., all without rinsing, saving precious time on building sites or during renovation work.
It is also suitable for drone application, notably for cleaning and degreasing facades and walls, even in inaccessible areas or at height.
SCALP DMC 73
SCALP DMC 73 is a professional cleaner designed for limestone facades and other mineral surfaces exposed to urban soiling. Its powerful action restores a natural shine to your surfaces, while effectively removing atmospheric pollution and stubborn stains. Easy to apply, it guarantees impeccable results without damaging delicate materials, ideal for long-term facade maintenance.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
