Peel-Off paste for sensitive surface cleaning
Professional roof waterproofing
Professional roof waterproofing - SCALPFUGE 35
Back to products
Professional brick & siliceous masonry cleaner
Professional brick & siliceous masonry cleaner - SCALP FACADE CLEANER 2

Peel-Off paste for sensitive surface cleaning – SCALPNET® PEELING

SCALPNET® PEELING is a peel-off cleaning paste designed for safe, dry cleaning of facades, stone, brick, metal, and painted surfaces. Its innovative elastic formula lifts and removes dust, soot, atmospheric dirt, and residues without using water, generating dust, or causing surface damage.

Ideal for both indoor and outdoor applications, this peel-off surface cleaner provides a practical and efficient solution for building facade cleaning, restoration, and industrial maintenance, particularly in sensitive or hard-to-reach areas.

Thanks to its peel-off technology, SCALPNET® PEELING leaves surfaces spotless, residue-free, and intact, ensuring professional-grade cleaning without abrasive action.

Technical Data Sheet
Safety Data Sheet
CALCULATE YOUR CONSUMPTION
Your surface area is m²
For an area of 0 m², you will need 0.00 L*
  • Odorless, ammonia-free dry cleaning – requires no water
  • Generates no dust and requires no noise-generating equipment
  • Effectively removes dust, soot, earthy deposits, and bird droppings
  • Easy to apply indoors and outdoors
  • Peel-off technology leaves surfaces clean and intact
  • Suitable for a wide range of materials: brick, concrete, stone, metal, painted surfaces, etc.
  • High-performance, ideal for industrial cleaning of large areas

 

  1. Preparation: Homogenise SCALPNET® PEELING thoroughly before use.
  2. Application: Apply a thick layer (minimum 1 mm) evenly onto the surface.
  3. Drying: Allow the product to dry until a uniform, transparent film forms (2–24 hours depending on temperature and humidity).
  4. Peeling: Carefully peel off the dried film to reveal a clean, residue-free surface.

Pro Tip : On low-porosity surfaces like marble, lightly wipe with a damp sponge after peeling to achieve maximum cleanliness.

  • For very low-porosity surfaces such as marble, follow up with a light wipe using a damp sponge after peeling.
  • No water is needed, making it ideal for sensitive areas where moisture could cause damage.
  • The maximum application time before peeling is one week.
  • Do not apply to heated surfaces or expose to direct heat, as the film may adhere and become difficult to remove.
Categories: ,

*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.

Products that may interest you

Biodegradable degreaser for industrial surfaces
Bio-sourced cleaner for food surfaces

Biodegradable degreaser for industrial surfaces – LESSIVE + EKO’R

, , , ,

LESSIVE+ EKO’R is a high-performance, eco-friendly degreaser designed for industrial, commercial, and food preparation surfaces. Its plant-based and bio-sourced formulation provides powerful cleaning and degreasing while remaining safe for food contact surfaces, including worktops, utensils, small equipment, and machinery parts.

Made from readily biodegradable ingredients in line with OECD standards, LESSIVE+ EKO’R is ideal for restaurants, industrial kitchens, canteens, hotels, and communal areas. Its non-aggressive formula works safely on tiles, porcelain stoneware, marble, and other mineral surfaces.

For large or hard-to-reach areas, LESSIVE+ EKO’R can be applied via drone, ensuring uniform coverage, faster cleaning, and improved safety for operators.

Quick view
Ultra-Fast Gel Paint Remover for Façades
SCALPEX SD+ - Gel facade stripper

Ultra-Fast Gel Paint Remover for Façades – SCALPEX® SD+

,

SCALPEX® SD+ is an ultra-fast gel paint stripper designed to efficiently remove paints, waterproofing systems, thin RPE coatings, and graffiti from a wide range of exterior surfaces, including render, concrete, stone, brick, wood, and mineral substrates.

Thanks to its innovative “flash effect” formula, it softens coatings in just 15–60 minutes depending on thickness. Ready to use, this gel paint remover is simple to apply with a brush or airless sprayer. Odourless and DCM-free, SCALPEX® SD+ is ideal for rapid, high-performance stripping on vertical façades and exterior walls.

Quick view
Professional Lead Paint Stripper
Gelled stripper for lead and asbestos

Professional Lead Paint Stripper – SCALPEX® AL 23

,

SCALPEX® AL 23 is a professional paint stripper for lead paint and asbestos coatings, specially formulated to provide safe, dust-free removal in compliance with UK building and health regulations. Its water-based gel is ideal for interior walls, staircases, corridors, kitchens, bedrooms, and other confined spaces.

The alkaline gel penetrates deeply, softening multiple layers of lead paint, silicate coatings, and asbestos-containing materials (ACMs) in a single application. Its controlled, progressive action ensures efficient stripping while minimising dust and hazardous fibre release.

Quick view
Metal surface degreaser & paint adhesion promoter
Degreaser and rust remover for metal surfaces

Metal surface degreaser & paint adhesion promoter – DEROX 320

,
DEROX 320 is a professional metal surface degreaser and paint adhesion promoter designed for preparing metal substrates prior to painting or coating. Specially developed for aluminium, zinc and galvanised steel, this concentrated solution cleans, degreases and activates surfaces to ensure maximum coating performance. Its powerful active formula removes grease, welding residues, light oxides, flux deposits and other contaminants that can compromise adhesion. By creating a perfectly clean and activated substrate, DEROX 320 significantly improves coating durability and prevents common paint defects such as blistering, peeling and flaking.
Quick view
Wet look water & oil repellent
Water repellent wet look

Wet look water & oil repellent – SCALP ANTI-TACHES EM

, , ,
SCALP ANTI-TACHES EM is a professional-grade treatment designed to restore the appearance of porous materials while providing long-lasting protection against stains and moisture. This high-performance product enhances colour and gives surfaces a durable “wet look” (colour-enhanced) finish, all without forming a film. Acting as an invisible barrier, it protects against water penetration, grease and oil stains, and spills from everyday liquids such as wine, coffee, or tannin. It also prevents the infiltration of urban and organic pollution. SCALP ANTI-TACHES EM helps inhibit the growth of microorganisms, reducing the appearance of green deposits, algae, and organic residue on treated surfaces. Particularly suited to porous horizontal surfaces, it is ideal for roofs, terraces, balconies, driveways, pool surrounds, exterior steps, and more. It can be easily applied to a wide range of materials including tiles, block paving, terracotta, natural and reconstituted stone, marble, cement, and concrete. SCALP ANTI-TACHES EM can also be applied by drone—an efficient solution for large or difficult-to-reach areas, ensuring fast, uniform, and safe application.  
Quick view

    You may be interested in

      Where to buy our products ?

      Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.

      Please contact us for more information :