FR
ES
DE
NL
PL
PT
Coloured Water-Repellent for Roof & Facade – SCALP HYDROCOLOR PAE
SCALP HYDROCOLOR PAE is a ready-to-use, water-based 2-in-1 coloured water repellent designed to protect roofs and facades while enhancing their natural colour. Its advanced formula penetrates deeply to form an invisible, breathable barrier against water, freeze/thaw damage, urban pollution, and biological growth, without altering the material’s appearance.
Unlike paints or coatings that form a film, SCALP HYDROCOLOR PAE maintains substrate breathability while providing a long-lasting aesthetic finish. Ideal for roof waterproofing and facade protection, it is compatible with a wide range of mineral substrates including concrete, hydraulic and mineral renders, brick, stone, slate, and tiles.
Available in four shades—Slate, Anthracite Grey, Sienna, and Brick Red—SCALP HYDROCOLOR PAE revitalises surfaces while offering practical protection. Its compatibility with drone application makes it perfect for large, elevated, or hard-to-reach areas, ensuring uniform, fast, and safe coverage.
- 2-in-1 coloured water repellent: protects and renovates surfaces
- Prevents water ingress and freeze/thaw damage
- Restores colour and brightness to dull roofs and facades
- Reduces urban soiling and limits biological growth
- Microporous and breathable—surface remains natural
- Water-based and VOC-free
- Beading effect ensures effective water repellency
- Sprayable and compatible with drone application for faster, safer, and uniform coverage
- Long-lasting protective and aesthetic results
- Suitable for both renovation and new-build projects
- Mix thoroughly before use.
- Apply from bottom to top on a clean, dry surface until fully saturated.
- Apply at least two coats, leaving a minimum of 1 hour between coats. Avoid overloading the product to prevent runs/streaks that may leave marks once dry.
- If the surface has been rinsed, wait at least 10 days for full drying before application.
Drying time : Touch dry in approximately 1 hour (may vary depending on weather and surface type).
- Minimum application temperature: 5°C and rising. Avoid direct sunlight/risk of frost.
- Ensure the surface is clean and completely dry.
- Test the color on a small area before full application.
- Suitable for both new and renovation projects.
- Can be applied using drones for high or difficult-to-access surfaces.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
Biodegradable Gel Paint Stripper – SCALPEX® EKO’R
SCALPEX® EKO’R is a biodegradable, gel-based façade stripper formulated for the rapid and safe removal of:
- Paints (including old lead-based layers)
- Textured coatings (RPE/RSE)
- Waterproofing films
- Thin layers on plaster, concrete, stone, and brick
Its gel texture ensures precise application without drips, making it perfect for vertical surfaces and façades. SCALPEX® EKO’R can be applied with a roller, brush, or pneumatic sprayer, and begins acting in as little as 40 minutes, depending on coating type and thickness.
Professional Paint Stripper for Façades – SCALPEX® SD NG
SCALPEX® SD NG is an ultra-fast chemical paint stripper designed for the rapid and safe removal of waterproofing systems, RPE coatings, thin paint films, adhesives, inks, varnishes, and graffiti. Free from methylene chloride, NMP, and NEP, this high-performance paint stripper remover delivers effective action across a wide range of substrates, including plaster, concrete, stone, brick, glass mosaic, wood, and mineral coatings.
Its optimised gel viscosity ensures excellent adhesion on vertical surfaces, making it the ideal paint remover for façades, exterior walls, and architectural elements.
Professional Lead Paint Stripper – SCALPEX® AL 23
SCALPEX® AL 23 is a professional paint stripper for lead paint and asbestos coatings, specially formulated to provide safe, dust-free removal in compliance with UK building and health regulations. Its water-based gel is ideal for interior walls, staircases, corridors, kitchens, bedrooms, and other confined spaces.
The alkaline gel penetrates deeply, softening multiple layers of lead paint, silicate coatings, and asbestos-containing materials (ACMs) in a single application. Its controlled, progressive action ensures efficient stripping while minimising dust and hazardous fibre release.
Industrial Cleaning Wipes for Hands & Surfaces – WIPES EXPRESS 90
WIPES EXPRESS 90 are industrial wipes designed for fast, effective cleaning of heavily soiled hands and smooth surfaces. Combining dual-sided textured wipes with powerful plant-based solvents, these professional wipes for cleaning remove stubborn contaminants quickly — with no water, rinsing or drying required.
Engineered for demanding working environments, they effectively remove paint, cured sealants, oils, grease, tar, bitumen, lubricants, adhesives, inks, waxes and other tough residues. Their advanced formulation delivers exceptional cleaning performance while remaining safe for frequent use on hands.
Ideal for construction, manufacturing, mechanical workshops, transport, marine, painting and maintenance operations, these industrial cleaning wipes provide a practical and efficient solution wherever rapid cleaning is essential.
WIPES EXPRESS 90 are also suitable for cleaning tools, machinery, vehicle interiors, alloy wheels, worktops, office equipment and other non-porous surfaces — ensuring fast, residue-free results every time.
Graffiti Remover for Sensitive Surfaces – SCALP SENSITIVE SURFACE CLEANER
- Wood (treated or untreated)
- Vehicle panels
- Road signage
- Surfaces protected with VERNAEAU PU 16 permanent anti-graffiti coatings
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
