04
Mar
VERNACRYL 30
VERNACRYL 30 is a semi-permanent protection designed for porous surfaces (stone, brick, concrete, wood, cement, etc.). It protects against all types of graffiti (paint, ink, felt-tip pen) while acting as a water repellent, preventing water infiltration. Single-component and primer-free, it is easy to apply and available in matte or gloss finishes. Once graffiti has been removed (with hot water or SCALPEX NW), the protection must be renewed. It does not yellow, respects water vapor permeability, and offers a practical and economical 2-in-1 solution.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- 2-in-1 product: anti-graffiti and water-repellent protection
- Quick and easy to use
- Single-component protection
- No primer required
- Colorless anti-graffiti protection, available in matte or glossy finishes
- Does not yellow the substrate
- AFNOR NF classification. T 36-005 Family I class 7b2
- Does not alter water vapor permeability
- VOC-free
Step 1
Mix VERNACRYL 30 thoroughly.
Step 2
Apply two coats of the product at 4-hour intervals, allowing the first coat to dry completely.
Step 3
Protection is effective after approximately 72 hours, depending on the outside temperature.
Graffiti removal : this can be done in two ways: with hot water (minimum 90°C under 90 bar pressure) or using SCALPEX NW. In both cases, the protection will disappear and will therefore need to be renewed.
VERNACRYL 30 is a complete sacrificial and water-repellent anti-graffiti protection solution, specially formulated for rough and porous surfaces such as stone, brick, concrete, cement, wood, and hydraulic coatings. Thanks to its dual action, this product effectively protects surfaces against tags, paint, ink, and markers, while preventing water infiltration.
Easy to use, VERNACRYL 30 is a single-component product that does not require a primer. It is applied in two cross coats 4 hours apart for optimal protection. Available in matte or gloss finishes, it offers high UV resistance without yellowing the treated surfaces. Once applied, the protective film becomes active after approximately 72 hours.
In the event of graffiti, cleaning can be carried out either with hot water (min. 90°C, pressure 90 bar) or using SCALPEX NW stripper. This process removes the protective film, which will then need to be reapplied. This semi-permanent protection is therefore ideal in urban environments or on new buildings, for easy maintenance and a surface that is always clean.
With VERNACRYL 30, you benefit from a fast, economical, and durable 2-in-1 treatment that respects water vapor permeability while preserving the appearance of the materials.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® SD+
SCALPEX® SD+ is an ultra-fast gel-based facade stripper designed to effectively remove paint, waterproofing agents, thin RPE films, and graffiti from various surfaces (plaster, concrete, stone, wood, etc.). Thanks to its “flash effect” formula, it works in 15 to 60 minutes, depending on the coating. Ready to use, it is easy to apply with a brush or airless sprayer. Odorless, non-toxic, and non-harmful, SCALPEX® SD+ is ideal for fast and powerful stripping on vertical surfaces.
SCALPEX® SD NG
SCALPEX® SD NG is an ultra-fast facade stripper for removing waterproofing, RPE, thin films, adhesives, inks, varnishes and graffiti. SCALPEX® SD NG contains no methylene chloride, NMP or NEP, and works quickly and effectively on a wide variety of substrates such as plaster, concrete, stone, brick, glass paste, wood and mineral coatings. Its ideal viscosity makes it ideal for stripping vertical surfaces, including facades and exterior walls.
SCALP AQUA 03
SCALP AQUA 03 is an ultra-polyvalent professional degreasing cleaner designed for cleaning and washing all synthetic surfaces used in the building industry, both indoors and out. Thanks to its ammonia-, acid- and chlorine-free formula, it can be used on materials such as PVC, aluminum, zinc, painted surfaces, cladding and many others. Its degreasing power easily removes greasy residues, dust, traces of glue, soot, etc., all without rinsing, saving precious time on building sites or during renovation work.
It is also suitable for drone application, notably for cleaning and degreasing facades and walls, even in inaccessible areas or at height.
WIPES EXPRESS 90
WIPES EXPRESS 90 EXTREME SOILS is the fast, convenient and ultra-efficient cleaning solution for hands and all smooth surfaces. Thanks to an advanced technology combining non-irritating abrasive wipes and powerful plant-based solvents, these wipes easily remove the most stubborn soiling, without water, rinsing or wiping.
Ideal for all professionals faced with difficult tasks (paints, sludge, oils, greases, tar, bitumen, lubricants, glues, inks, charcoal, waxes, etc.), they offer extreme efficiency even under the most demanding conditions.
Designed for use anywhere, anytime, WIPES EXPRESS 90 wipes are ideal for use in construction, industry, mechanical engineering, painting, marine, landscaping, transport, aeronautics and other sectors. They are also ideal for cleaning tools, car interiors, rims, photocopiers, computers, worktops, machines and whiteboards.
Versatile, they can be used on both hands and non-porous surfaces. The result: fast, residue-free cleaning without damaging the skin or compromising on cleanliness.
SCALP DMC 73
SCALP DMC 73 is a professional cleaner designed for limestone facades and other mineral surfaces exposed to urban soiling. Its powerful action restores a natural shine to your surfaces, while effectively removing atmospheric pollution and stubborn stains. Easy to apply, it guarantees impeccable results without damaging delicate materials, ideal for long-term facade maintenance.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
