SCALPIK® L 300
SCALPIK® L 300 is a methylene chloride-free liquid paint stripper, specially formulated for cold-bath removal of industrial coatings including powder coatings, epoxies, polyurethanes, and varnishes. Designed for immersion in steel tanks, this professional product is suitable for a wide range of substrates, including steel and aluminium. Ready-to-use, it acts quickly and efficiently, removing even thick layers without heating, making it ideal for defective paint runs or refurbishment of painted surfaces.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Liquid paint stripper suitable for most common industrial coatings
- Immersion stripping for controlled, effective results
- Rapid-acting formula
- Methylene Chloride-Free (DCM-Free)
- Works at room temperature: no heating required
- SCALPIK® L 300 is ready to use.
- Pour the product into a steel tank.
- Immerse the part to be stripped.
- Allow sufficient time for all paint layers to be fully removed.
- Remove stripped parts and rinse thoroughly with pressurised water (ideally).
- Designed exclusively for cold immersion baths in watertight steel tanks, minimising evaporation and prolonging bath life.
- Particularly effective for removing defective paint and refurbishing industrial coatings.
- Suitable for a wide variety of industrial coatings.
- Stripping time depends on the type and thickness of the coating, ranging from a few minutes to several hours.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPEX® NW NG
SCALPEX® NW NG is a highly effective gel paint stripper designed to remove paint, varnish and wood stain from a wide range of substrates, including wood, joinery, metal, zinc, concrete and stone. Its gel texture ensures excellent adhesion, even on vertical surfaces, without dripping—making it an essential solution for both interior and exterior renovation projects.
This gel stripper is perfectly suited for stripping staircases, window frames, joinery, panels, furniture and other delicate surfaces. Ideal for both major renovation work and regular maintenance tasks.
SCALPIK® L 12 S
SCALPIK® L12S is an enhanced liquid stripper specially formulated for cold-bath stripping of common paints and varnishes used in industrial and manufacturing environments. Its layer-by-layer penetration action effectively removes coatings from the substrate, even when they are multi-layered or strongly adhered.
When used in a cold bath, SCALPIK® L12S requires no heating, simplifying the process while providing excellent efficiency. This non-saturating product allows continuous use: simply remove paint residues that settle at the bottom of the tank and adjust the bath level to maintain optimal performance.
ADDITIF STRIPAC BASE ECO
ADDITIF STRIPAC BASE ECO is a concentrated alkaline additive for immersion paint stripping using the STRIPAC method. Designed to enhance the performance of stripping baths, this professional additive effectively removes a wide range of industrial coatings, including epoxy polyester, alkyd (or glycerophthalic), vinyl, acrylic, woodstains, varnishes, primers, and more.
It works by dissolving resins and breaking down mineral pigments in the paint film. Once the coating is destabilized, it can be easily removed by rinsing, immersion, or high-pressure cleaning. Its substrate-friendly formulation ensures maximum efficiency without damaging steel, wood, or other compatible materials.
SCALP SEAL
SCALP SEAL is a refined petroleum-based anti-evaporation oil, specifically designed for use in chemical stripping baths. During paint stripping, strippers tend to evaporate, causing product loss and reduced efficiency. SCALP SEAL prevents this by forming a protective layer on the bath surface, significantly limiting evaporation.
Its high density allows it to float naturally on the bath surface, creating a physical barrier to vapours without chemically interacting with the stripper. SCALP SEAL has no activating or penetrating properties—it simply stabilises the bath and maintains the stripper’s effectiveness over time.
This ready-to-use product is simple to apply and compatible with most industrial stripping bath processes.
SCALPROTECT 31
SCALPROTEC 31 is a protective oil for metal surfaces, formulated with corrosion inhibitors dissolved in refined mineral oil. It provides temporary anti-corrosion protection for 3 to 9 months, depending on storage conditions.
This versatile product is suitable for a wide range of metals, including cast iron, steel, aluminium alloys, magnesium alloys, copper and zinc. SCALPROTEC 31 is widely used across industrial sectors such as automotive, aerospace and oil industries, notably for protecting spare parts, metal pipes (interiors) and sheet metal prior to stamping or other processing operations.
Ready-to-use, SCALPROTEC 31 can be easily applied by immersion, spraying, brushing or wiping.
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
