04
Mar
STRIPAC NI BASE ECO
STRIPAC NI BASE ECO is an immersion paint stripper specifically formulated for stripping aluminum. This cold bath works effectively at room temperature, in conjunction with the STRIPAC additive, to remove welding oxides, impurities and a wide range of paints: epoxy, polyester, glycerophthalic, vinyl, acrylic, lasures, varnishes, primers, etc.Thanks to its concentrated formula, STRIPAC NI BASE ECO works by dissolving resins and altering mineral pigments, while preserving aluminum’s corrosion resistance. It is non-aggressive on sensitive substrates such as steel, aluminum and wood, making it an ideal solution for delacquering aluminum profiles.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Strips a wide range of paints
- Used at room temperature
- Does not attack substrates such as steel, aluminum and wood
- Stripping by immersion in cold bath
Step 1
Fill a tank with STRIPAC NI BASE ECO
Step 2
Add STRIPAC ADDITIVE according to technical recommendations
Step 3
Homogenize the bath to guarantee uniform action
Step 4
Immersing the parts to be treated (aluminum, steel, wood)
Step 5
Leave to act until the coating is completely degraded
Step 6
Rinse thoroughly with clean water or a high-pressure cleaner
Step 7
Perform a surface treatment after rinsing, particularly for metal parts before repainting
STRIPAC NI BASE ECO is particularly recommended for delacquering aluminum profiles. Its chemical action effectively breaks down paint films, preparation oxides and other contaminants present on the surface.
It is used exclusively by dipping, in combination with the STRIPAC additive, in suitable tanks, and guarantees optimum effectiveness without damaging substrates.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
SCALPIK® L 300
SCALPIK® L 300 is a methylene chloride-free liquid paint stripper, specially formulated for cold-bath stripping of all industrial paints such as powder coatings, epoxies, polyesters and varnishes. This professional product is used by immersion in steel tanks, and is suitable for a wide variety of substrates, including steel and aluminum. This ready-to-use paint stripper offers fast, effective action, removing even thick coatings without the need for heating. It is particularly recommended for the treatment of defective paint runs or for refurbishing painted surfaces.
SCALPIK® L 400
SCALPIK® L 400 is a professional liquid paint stripper designed for use in immersion hot baths. Specially formulated for stripping paint and varnish from ferrous and non-ferrous metals, this product is perfectly suited to metal and aluminum surfaces. Thanks to its innovative methylene chloride-free formula, SCALPIK® L 400 is an effective and safer alternative to conventional paint strippers. It removes epoxy, polyester, acrylic, vinyl and cataphoretic coatings, as well as many varnishes and unbaked paints.
ACTIVATOR SCALPIK L12S
SCALPIK L12S ACTIVATOR is a technical additive designed for use as a complement to a SCALPIK L12S-based pickling bath. This product has no stripping power of its own, but is formulated to restore the efficiency of the stripping bath when it begins to lose performance.
In fact, chlorinated paint strippers like SCALPIK L12S are subject to evaporation during use, notably due to frequency of use, bath temperature or air contact surface. SCALPIK L12S ACTIVATOR compensates for this loss of power by restoring the bath's properties
In fact, chlorinated paint strippers like SCALPIK L12S are subject to evaporation during use, notably due to frequency of use, bath temperature or air contact surface. SCALPIK L12S ACTIVATOR compensates for this loss of power by restoring the bath's properties
NST PRO 61
NST PRO 61 is an industrial cleaner and degreaser specifically designed for mechanical parts. Formulated from aliphatic hydrocarbons, this product is ideal for removing oils and greases from metal surfaces and components such as bearings, balls, engine parts and steel molds. Its effectiveness in cleaning precision mechanical parts makes it a preferred choice for sectors requiring top-level cleaning performance, such as automotive, aerospace and mechanical engineering.
SCALPNET® 60
SCALPNET® 60 is a water-based professional degreaser specially designed for cleaning road vehicles. Its concentrated formula effectively removes static film and encrusted dirt from car bodies. Versatile and powerful, SCALPNET® 60 can also be used to clean various surfaces with high-pressure machines. It has an in-depth, yet gentle effect on materials, restoring plastics to their original shine. Thanks to its self-drying effect, it facilitates the rinsing process and reduces streaking after washing
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
