04
Mar
SCALP ANTI-TACHES EM
SCALP ANTI-TACHES EM is a professional treatment specially formulated to restore the appearance of materials while effectively protecting them against stains and moisture. This high-performance product provides a long-lasting wet look, restoring color and shine to your dull surfaces without forming a film on the surface.
It acts as an invisible barrier against water infiltration, grease stains, food liquids (wine, coffee, oil, tannin, etc.) and prevents urban or organic pollution from penetrating the surfaces. SCALP ANTI-TACHES EM is also effective against the development of microorganisms, thus limiting the appearance of green deposits and algae on treated surfaces.
Particularly recommended for porous horizontal surfaces, it is ideal for roofs, terraces, balconies, driveways, pool decks, outdoor stairs, etc. It is easy to apply to a wide variety of materials such as tiles, interlocking pavers, terracotta tiles, natural or reconstituted stone, marble, cement, concrete, etc. It can also be applied by drone, an ideal solution for hard-to-reach areas or large surfaces, ensuring fast, even, and safe application.
CALCULATE YOUR CONSUMPTION
Your surface area is
m²
For an area of 0 m², you will need 0.00 L*
- Highly effective
- Protects against water, oils, grease, and food stains
- Revives the surface, giving it a wet look
- Water-repellent effect
- Solvent-free
- Quick and easy impregnation into the pores of materials
- Microporous
- Prevents surface fouling and limits the formation of microorganisms
- Facilitates surface maintenance
- Indoor and outdoor use
- Ideal for roofs, floors, terraces, and pool decks
- VOC-free
- Sprayable: formula perfectly compatible with drone spraying
- Application by drone = increased safety, time savings, uniform spraying, and reduced costs
Step 1:
Mix SCALP ANTI-TACHES EM thoroughly, then apply to saturation on the surface to be treated (from bottom to top in the case of a vertical surface).
Step 2:
Apply one or two coats at least 1 hour apart. Avoid overloading the product, which could cause dripping and leave marks on the surface.
If the surface has been rinsed beforehand, wait at least 10 days before applying SCALP ANTI-TACHES EM.
- SCALP ANTI-TACHES EM must be applied to clean, dry surfaces.
- If the surface has been rinsed beforehand, wait at least 10 days before applying the product.
- The treatment is effective once the product has completely dried (approximately 8 hours).
- SCALP ANTI-TACHES EM must be applied in favorable weather conditions, i.e., between +5°C and +50°C.
- Do not apply the product to non-absorbent materials such as plastic, metal, etc.
*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.
Products that may interest you
LESSIVE + EKO’R
LESSIVE + EKO’R is a cleaner and degreaser for surfaces that may come into contact with foodstuffs. It is formulated from plant-based and bio-sourced raw materials. It is an ideal degreaser for cleaning and degreasing small equipment, machine parts, and surfaces that may come into contact with foodstuffs.
This cleaner, made from biodegradable raw materials in accordance with OECD standards, effectively removes grease from surfaces in industrial kitchens, dining rooms, hotels, canteens, communal areas, etc. Non-aggressive and non-corrosive, it cleans and degreases mineral surfaces such as tiles, porcelain stoneware, marble, etc. LESSIVE + EKO'R can also be applied by drone for fast, even, and safe application without direct contact with the surface.
SCALP ANTI-M
SCALP ANTI-M is a preventive anti-green deposit treatment, ideal for providing long-lasting protection against green deposits, algae, lichens, and microorganisms on roofs, facades, floors, and walls. It can be applied to materials commonly found in buildings (tiles, slates, fiber cement, shingles, stones, mineral coatings, bricks, plaster, concrete, roughcast, thick plastic coatings, wood). By forming a protective barrier, SCALP ANTI-M prevents the reappearance of these organisms (algae, microorganisms, lichens) and thus prolongs the life of the treated surfaces. The treated surface regains a healthy appearance under the action of rain and wind.
Use by drone allows for quick, even, and safe application without direct contact with the surface.
WIPES EXPRESS 90
WIPES EXPRESS 90 EXTREME SOILS is the fast, convenient and ultra-efficient cleaning solution for hands and all smooth surfaces. Thanks to an advanced technology combining non-irritating abrasive wipes and powerful plant-based solvents, these wipes easily remove the most stubborn soiling, without water, rinsing or wiping.
Ideal for all professionals faced with difficult tasks (paints, sludge, oils, greases, tar, bitumen, lubricants, glues, inks, charcoal, waxes, etc.), they offer extreme efficiency even under the most demanding conditions.
Designed for use anywhere, anytime, WIPES EXPRESS 90 wipes are ideal for use in construction, industry, mechanical engineering, painting, marine, landscaping, transport, aeronautics and other sectors. They are also ideal for cleaning tools, car interiors, rims, photocopiers, computers, worktops, machines and whiteboards.
Versatile, they can be used on both hands and non-porous surfaces. The result: fast, residue-free cleaning without damaging the skin or compromising on cleanliness.
SCALP PIERRE AQUA 89
SCALP PIERRE AQUA 89 is a specialized cleaner for stone facades, designed to eliminate atmospheric pollution and environmental soiling. Thanks to its new-generation formula, this product effectively cleans fragile materials. SCALP PIERRE AQUA 89 facilitates the maintenance of stone facades, offering fast, easy, noise-free cleaning. Suitable for a wide range of surfaces, it is the ideal tool for keeping façades clean without having to resort to invasive, noisy techniques. It can also be sprayed using a drone, making it easy to intervene in hard-to-reach areas while limiting logistical constraints.
SCALP SOL’NET
SCALP SOL'NET is a concentrated professional cleaner specially designed to remove cement films, laitance, efflorescence and end-of-job marks from a multitude of surfaces. Ideal for cleaning after tiling, it effectively removes cement residues, plaster, tartar and saltpetre.
SCALP SOL'NET quickly dissolves cement deposits, even when they have been hardened for several days. It is particularly recommended for :
- Cleaning cement laitance after grouting tiles or slabs
- Removing cement films from hard surfaces (tiles, ceramics, bricks, breeze blocks, etc.)
- Removal of efflorescence and cement build-up
You may be interested in
Where to buy our products ?
Our products are available from over 2,000 sales outlets, via professional paint, materials and industrial hardware distribution networks.
Please contact us for more information :
