Solvent-Based Polysiloxane Water Repellent – SCALPFUGE PS 86

SCALPFUGE PS 86 is a solvent-based polysiloxane water repellent, formulated for the long-term protection of porous substrates such as concrete, stone, brick, and cement. It penetrates deeply without forming a surface film, allowing materials to breathe. Ideal for waterproofing facades, walls, and floors.

CALCULATE YOUR CONSUMPTION

Your surface area is m²

For an area of 0 m², you will need 0.00 L*

Premium-grade water repellent
Highly pronounced beading effect
Does not alter the colour of the substrate
Microporous, allowing free passage of water vapour
Sprayable
Quick and easy penetration into the pores of materials

Ensure surfaces are clean, dry, and dust-free. Mix SCALPFUGE PS 86 thoroughly before use.
Apply from bottom to top until the surface is fully saturated.
Repeat the application a second time after approximately 10–15 minutes using the “wet-on-wet” method. Avoid overloading, which may cause drips or marks on the substrate.

Recommendation : Only apply to clean, dry surfaces. If the surface has been rinsed, allow at least 10 days before application.

Ready-to-use : do not dilute.
Application methods : roller (natural fibers) or hand sprayer.
Coverage: approx. 0.3 L/m² for two coats, depending on substrate porosity.
Effective water-repellent action: after complete solvent evaporation (approx. 72 hours).
Application temperature: between 5°C and 50°C (effectiveness may be reduced at extremes).
Tool cleaning : use white spirit immediately after application.

Categories: Construction, Water and oil repellents

*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.

Products that may interest you

Industrial Cleaning Wipes for Hands & Surfaces – WIPES EXPRESS 90

Construction, Cleaner

WIPES EXPRESS 90 are industrial wipes designed for fast, effective cleaning of heavily soiled hands and smooth surfaces. Combining dual-sided textured wipes with powerful plant-based solvents, these professional wipes for cleaning remove stubborn contaminants quickly — with no water, rinsing or drying required.

Engineered for demanding working environments, they effectively remove paint, cured sealants, oils, grease, tar, bitumen, lubricants, adhesives, inks, waxes and other tough residues. Their advanced formulation delivers exceptional cleaning performance while remaining safe for frequent use on hands.

Ideal for construction, manufacturing, mechanical workshops, transport, marine, painting and maintenance operations, these industrial cleaning wipes provide a practical and efficient solution wherever rapid cleaning is essential.

WIPES EXPRESS 90 are also suitable for cleaning tools, machinery, vehicle interiors, alloy wheels, worktops, office equipment and other non-porous surfaces — ensuring fast, residue-free results every time.

Quick view

Gentle Stone Cleaner for Facades – SCALP PIERRE AQUA 89

Construction, Cleaner, Drone Products, Cleaning

SCALP PIERRE AQUA 89 is a dedicated stone façade cleaner formulated to remove atmospheric pollution and environmental staining. Its next-generation composition delivers highly effective cleaning while fully respecting fragile substrates. Designed for the gentle maintenance of stone façades, it enables fast, easy and noise-free cleaning—without the need for abrasive or intrusive methods. Suitable for a wide variety of mineral surfaces, SCALP PIERRE AQUA 89 is the ideal solution for maintaining immaculate façades with minimal environmental impact. The product can also be applied by drone, offering a safe, efficient and low-logistics approach for hard-to-reach areas.

Quick view

Professional Limestone & Stone Façade Cleaner – SCALP DMC 73

Construction, Cleaner

SCALP DMC 73 is a professional limestone and stone façade cleaner designed to remove urban pollution, atmospheric deposits, and stubborn dirt from exterior masonry and mineral surfaces. Specially formulated for calcareous stone such as limestone and sandstone, it restores the natural appearance and brightness of building façades without damaging delicate materials. Its ready-to-use formula penetrates deep into the substrate to dissolve encrusted dirt and pollution residues, providing fast and effective façade restoration. Ideal for building maintenance, stone restoration, and heritage cleaning projects, SCALP DMC 73 offers a safe and efficient alternative to abrasive cleaning methods such as sandblasting.

Quick view

Wet look water & oil repellent – SCALP ANTI-TACHES EM

Drone Products, Protection, Construction, Water and oil repellents

SCALP ANTI-TACHES EM is a professional-grade treatment designed to restore the appearance of porous materials while providing long-lasting protection against stains and moisture. This high-performance product enhances colour and gives surfaces a durable “wet look” (colour-enhanced) finish, all without forming a film. Acting as an invisible barrier, it protects against water penetration, grease and oil stains, and spills from everyday liquids such as wine, coffee, or tannin. It also prevents the infiltration of urban and organic pollution. SCALP ANTI-TACHES EM helps inhibit the growth of microorganisms, reducing the appearance of green deposits, algae, and organic residue on treated surfaces. Particularly suited to porous horizontal surfaces, it is ideal for roofs, terraces, balconies, driveways, pool surrounds, exterior steps, and more. It can be easily applied to a wide range of materials including tiles, block paving, terracotta, natural and reconstituted stone, marble, cement, and concrete. SCALP ANTI-TACHES EM can also be applied by drone—an efficient solution for large or difficult-to-reach areas, ensuring fast, uniform, and safe application.

Quick view

Professional Graffiti Removal Product – SCALP GRAFFITI REMOVER

Construction, Anti-Graffiti

SCALP GRAFFITI REMOVER is a professional, intensive graffiti removal product formulated to remove graffiti from mineral surfaces including stone, concrete, granite, marble, slate, and even porous wood. Its formula tackles spray paint, ink, markers, varnish, and lacquer, restoring walls, façades, monuments, and urban infrastructure to their original condition.

Quick view