Coloured Water-Repellent for Roof & Facade

Coloured Water-Repellent for Roof & Facade – SCALP HYDROCOLOR PAE

SCALP HYDROCOLOR PAE is a ready-to-use, water-based 2-in-1 coloured water repellent designed to protect roofs and facades while enhancing their natural colour. Its advanced formula penetrates deeply to form an invisible, breathable barrier against water, freeze/thaw damage, urban pollution, and biological growth, without altering the material’s appearance.

Unlike paints or coatings that form a film, SCALP HYDROCOLOR PAE maintains substrate breathability while providing a long-lasting aesthetic finish. Ideal for roof waterproofing and facade protection, it is compatible with a wide range of mineral substrates including concrete, hydraulic and mineral renders, brick, stone, slate, and tiles.

Available in four shades—Slate, Anthracite Grey, Sienna, and Brick Red—SCALP HYDROCOLOR PAE revitalises surfaces while offering practical protection. Its compatibility with drone application makes it perfect for large, elevated, or hard-to-reach areas, ensuring uniform, fast, and safe coverage.

CALCULATE YOUR CONSUMPTION

Your surface area is m²

For an area of 0 m², you will need 0.00 L*

2-in-1 coloured water repellent: protects and renovates surfaces
Prevents water ingress and freeze/thaw damage
Restores colour and brightness to dull roofs and facades
Reduces urban soiling and limits biological growth
Microporous and breathable—surface remains natural
Water-based and VOC-free
Beading effect ensures effective water repellency
Sprayable and compatible with drone application for faster, safer, and uniform coverage
Long-lasting protective and aesthetic results
Suitable for both renovation and new-build projects

Mix thoroughly before use.
Apply from bottom to top on a clean, dry surface until fully saturated.
Apply at least two coats, leaving a minimum of 1 hour between coats. Avoid overloading the product to prevent runs/streaks that may leave marks once dry.
If the surface has been rinsed, wait at least 10 days for full drying before application.

Drying time : Touch dry in approximately 1 hour (may vary depending on weather and surface type).

Minimum application temperature: 5°C and rising. Avoid direct sunlight/risk of frost.
Ensure the surface is clean and completely dry.
Test the color on a small area before full application.
Suitable for both new and renovation projects.
Can be applied using drones for high or difficult-to-access surfaces.

Categories: Construction, Drone Products, Protection, Water and oil repellents

*Yield figures are provided for informational purposes only. These data can be used to estimate project costs. They are not contractual; only tests can accurately determine the quantities of product to be applied depending on the different surfaces to be treated.

Products that may interest you

Eco-friendly stone cleaner for facades – STONE NET EKO’R

Construction, Cleaner, Drone Products, Cleaning, EKO'R range

STONE NET EKO’R is a concentrated, eco-friendly stone cleaner designed for safe and effective maintenance of stone façades, marble, concrete, plaster, and delicate masonry. Its biodegradable formula removes atmospheric pollutants, including black carbon deposits and urban dirt, restoring the natural brightness of fragile or porous surfaces. Ideal for sensitive materials such as limestone, facing stone, sculptures, and heritage elements, STONE NET EKO’R is also suitable for drone application, providing safe, uniform cleaning on large façades or hard-to-reach areas. Made from biodegradable raw materials and OECD 301F compliant, it meets strict environmental requirements while delivering professional cleaning performance in urban and high-traffic locations.

Quick view

Ultra-Fast Gel Paint Remover for Façades – SCALPEX® SD+

Construction, Paint-Strippers

SCALPEX® SD+ is an ultra-fast gel paint stripper designed to efficiently remove paints, waterproofing systems, thin RPE coatings, and graffiti from a wide range of exterior surfaces, including render, concrete, stone, brick, wood, and mineral substrates.

Thanks to its innovative “flash effect” formula, it softens coatings in just 15–60 minutes depending on thickness. Ready to use, this gel paint remover is simple to apply with a brush or airless sprayer. Odourless and DCM-free, SCALPEX® SD+ is ideal for rapid, high-performance stripping on vertical façades and exterior walls.

Quick view

Concrete Cleaner & Cement Residue Remover – SCALP SOL’NET

Construction, Cleaner

SCALP SOL’NET is a concentrated professional concrete cleaner formulated to remove cement films, laitance, efflorescence and post-construction residues from a wide range of hard surfaces. Designed for demanding cleaning and surface preparation tasks, it rapidly dissolves cement deposits, plaster residue, limescale and salt-based contamination.

Ideal for post-tiling operations and construction site clean-up, this powerful solution eliminates hardened cement build-up — even after several days — restoring surfaces to a clean, ready-to-finish condition.

As a highly effective concrete floor cleaner, SCALP SOL’NET is particularly suitable for preparing floors before coating, painting or sealing, ensuring optimal adhesion and long-lasting results.

Recommended applications include:

Removal of cement laitance after grouting tiles or slabs
Cleaning cement films from tiles, ceramics, bricks and concrete blocks
Elimination of efflorescence and salt deposits
Degreasing and preparation of concrete surfaces

Quick view

Aluminium & stainless steel cleaner & passivator – SCALPINOX D

Construction, Cleaner, Industry, Passivators

SCALPINOX D is a professional aluminium and stainless steel cleaner designed to restore the original appearance of metal surfaces while preparing them for coating or further treatment. It effectively removes oxidation, tarnish and atmospheric deposits caused by urban pollution, leaving surfaces clean, bright and fully restored. Specially recommended for anodised aluminium window frames and joinery, this solution also provides passivating, rust-removing and phosphating action, creating an optimal bonding base for paint systems and surface treatments. By activating and stabilising metal substrates, SCALPINOX D improves coating adhesion and supports long-lasting renovation, refurbishment and maintenance work across construction and finishing applications.

Quick view

Professional Graffiti Removal Product – SCALP GRAFFITI REMOVER

Construction, Anti-Graffiti

SCALP GRAFFITI REMOVER is a professional, intensive graffiti removal product formulated to remove graffiti from mineral surfaces including stone, concrete, granite, marble, slate, and even porous wood. Its formula tackles spray paint, ink, markers, varnish, and lacquer, restoring walls, façades, monuments, and urban infrastructure to their original condition.

Quick view